Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#50589

REX Schneekette REX ATB Schneekette REX ATB

Type: 358

ÖKONOMISCH UND ZÄHBewährte Doppelspurkette für leichte bis mittelschwere Einsätze in der Land- und Forstwirtschaft. Die REX ATB eignet sich besonders gut als einfache, aber gute Schneekette für Land- und Forstmaschinen,Hergestellt in Deutschland.Außergewöhnlich für diese Kettenklasse, ist die REX ATB auf der Lauffläche komplett durch geschweißte Ringe verbunden, was für zusätzliche Stabilität sorgtDas quadratische Laufnetz ist speziell für Ackerstollenbereifung konstruiertHochwertiger Einsatzstahl sorgt für höchste Härte und beste ZugfestigkeitDie Lauffläche ist komplett aus robusten Kantenstahlgliedern gefertigt – je nach Fahrzeug und Reifengröße in 7, 8 oder 10 mm MaterialstärkeDie REX ATB verfügt über das klassische Verschlusssystem von Doppelspurketten, was eine durchgängige Lauffläche sowie maximale Anpassungsfähigkeit garantiertDie innere Seitenkette ist zur Größen-Anpassung durch Schäkel verstellbarWendbarkeit sorgt bei der REX ATB für zusätzliche LebensdauerGewichtsabhängig verpackt in speziellen Säcken mit Schlaufe oder Kistenandere Dimensionen und Ausführungen auf Anfrage

€697.00*

#46282

REX Schneekette REX ATR Schneekette REX ATR

Type: 860

SOLIDE UND UNIVERSELLBewährte Netzkette für normale Wintereinsätze. Die REX ATR eignet sich besonders gut als Allround-Kette für Land- und Forstwirtschaft.ÖNORM V5119 geprüft, Hergestellt in Deutschland.Solides Laufnetz ohne Verstärkungen sorgt für geringes Gewicht ohne auf beste Traktion und Verschleißfestigkeit verzichten zu müssenDer innovative Laufnetzaufbau verschafft der REX ATR beste SelbstreinigungseigenschaftenHochwertiger Einsatzstahl sorgt für höchste Härte und beste ZugfestigkeitDie Lauffläche ist komplett aus robusten Kantenstahlgliedern gefertigt – je nach Fahrzeug und Einsatzbereich in 7, 8 oder 10 mm MaterialstärkeBewährtes Verschluss-System mit Kontermechanismus sorgt für einfaches Handling bei 100%igem AushakschutzDie innere Seitenkette ist zur Größen-Anpassung durch Schäkel verstellbarWendbarkeit sorgt bei der REX ATR für zusätzliche LebensdauerGewichtsabhängig verpackt in speziellen Säcken mit Schlaufe oder Kistenandere Dimensionen und Ausführungen auf Anfrage

€1,902.00*

#52783

BERMA Scraper floor gearbox RT150 12:1 1500Nm Scraper floor gearbox RT150 12:1 1500Nm

recommended oil motor: 18397, 18399 Ø shaft (mm): 35

In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€625.00*

#97804

Scraping bar 90x22mm made of St70.2 Scraping bar 90x22mm made of St70.2

Length (mm): 2000

Scraping bar for welding to front loader shovels, rear loaders or snow plows.Material St70.2,Delivered ready to length.

€182.00*

Variants from €86.90*

Schraube M12x1,75x60 10.9 mit Sicherungsmutter

#68170

Screw 10.9 with lock nut Screw 10.9 with lock nut

Ø x length (M): M16x80

€3.39*

Variants from €2.79*

#FA39204

Screw 7/16' x 63 with nut Screw 7/16' x 63 with nut

€2.00*

#FA43827

Screw 7/16' x 82mm Screw 7/16' x 82mm

Screw 7/16"~ x 82mm with lock nut, strength 10.9

€1.69*

#FA108074

Screw adjustment rim MF Screw adjustment rim MF

Thread 5/8?UNF, version with square driveLength: 71mm

€5.80*

#FA108075

Screw adjustment rim MF Screw adjustment rim MF

Thread: 5/8?UNF, version with 1 noseLength: 73mmSurface:Blue passivation

€4.90*

#FA34310

ESM Screw complete Screw complete

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

€4.19*

Schraubkupplungsstecker nach ISO 14541 mit Innengewinde, Serie PVV3

#98824

DNP Screw coupling connector according to ISO 14541 with internal thread, PVV3 series Screw coupling connector according to ISO 14541 with internal thread, PVV3 series

BG/DN: 3/DN13 Flow rate (l/min): 45-90 L2 (mm): 72,5 L3 (mm): 70 Operating pressure (bar): 400 Thread: R 3/4 Zoll Version: Stecker

The PVV3 screw coupling series from dnp complies with ISO standard 14541 in sizes DN06 to DN20. In the standard version, the couplings are equipped with NBR seals. A version with EPDM or Viton seals is available on request. The operating pressure of the couplings has a range of 300 (DN30) to 450 bar (DN06).Coupling under residual pressure is possible on both the plug side and the socket side !

€17.90*

Variants from €10.90*

Schraubkupplungsmuffe nach ISO 14541 mit Innengewinde, Serie PVV3

#98821

DNP Screw coupling sleeve according to ISO 14541 with internal thread, PVV3 series Screw coupling sleeve according to ISO 14541 with internal thread, PVV3 series

BG/DN: 3/DN13 Flow rate (l/min): 45-90 L2 (mm): 67 L3 (mm): 64,5 Operating pressure (bar): 400 Thread: R 1/2 Zoll Version: Muffe

€10.90*

Schraubkupplungen nach DIN 2353 mit Schottgewinde Serie PVV3

#36915

Screw couplings according to DIN 2353 with bulkhead thread series PVV3 Screw couplings according to DIN 2353 with bulkhead thread series PVV3

Thread: M 18 x 1,5

Bulkhead fitting

€12.00*

#24296

Screw couplings according to DIN 2353 with bulkhead thread series PVV3 Screw couplings according to DIN 2353 with bulkhead thread series PVV3

Series / pipe Ø: 15L Thread: M 22 x 1,5

Bulkhead fitting

€12.00*

Schraubkupplungen mit AG - schwere Baureihe Serie PVV3

#31702

Screw couplings with AG - heavy series series PVV3 Screw couplings with AG - heavy series series PVV3

Thread: M 20 x 1,5

According to DIN 2353.

€10.70*

Schraubkupplungen mit AG - leichte Baureihe Serie PVV3

#31701

Screw couplings with male thread - heavy series PVV3 series Screw couplings with male thread - heavy series PVV3 series

BG: 3 BG/DN: 3/DN13 Flow rate (l/min): 45-90 Nominal size: DN13 Operating pressure (bar): 300 SW (mm): 30 Series / pipe Ø: 12S Thread: M 20 x 1,5 Ø E (mm): 42

According to DIN 2353.

€10.70*

#19195

Screw couplings with male thread - light series PVV3 series Screw couplings with male thread - light series PVV3 series

Series / pipe Ø: 18L Thread: M 26 x 1,5

According to DIN 2353

€35.00*

Variants from €10.70*

#19230

Screw couplings with male thread - light series PVV3 series Screw couplings with male thread - light series PVV3 series

BG: 5 BG/DN: 5/DN25 Flow rate (l/min): 189-280 Nominal size: DN25 Operating pressure (bar): 250 SW (mm): 41 Series / pipe Ø: 28L Thread: M 36 x 2,0 Ø E (mm): 55

According to DIN 2353

€35.00*

Variants from €10.70*

#101160

Screw handle external thread Screw handle external thread

D (mm): 50 L (mm): 25 Thread: M 8

€3.95*

Variants from €3.35*

#101164

Screw handle internal thread Screw handle internal thread

D (mm): 50 E (mm): 12 Thread: M 8

€4.20*

Variants from €2.99*

#FA70718

Screw M10x1x30 mm 10.9, with lock nut Screw M10x1x30 mm 10.9, with lock nut

€0.65*

Schraube M12x1,25x35, 12.9 mit Sicherungsmutter

#FA16858

Screw M12x1.25x35, 12.9 with lock nut Screw M12x1.25x35, 12.9 with lock nut

€1.00*

#FA74680

Screw M12x1.25x35/12.9 Screw M12x1.25x35/12.9

€0.99*

#FA20405

Screw M12x1.25x40/12.9 Screw M12x1.25x40/12.9

€0.99*

Seite 140 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery