Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Laufstummel über 25 km/h incl. Kugelbundschrauben M12x1,5

#FA77943

Running stub over 25 km/h including ball collar screws M12x1.5 Running stub over 25 km/h including ball collar screws M12x1.5

Running stub, axle stub for 5-hole rims, with wheel bolts for unbraked trailers.

€94.80*

#FA101537

Mipa Rust protection gray 2.5l Rust protection gray 2.5l

Metal primer, pebble gray for iron and steel, suitable for both indoor and outdoor use.Chrome and lead free. High quality, weatherproof, runs very well. Impact, scratch and weatherproof. With high coverage.

€38.50*

Content: 2.5 l (€15.40 / 1 l)

#FA101536

Mipa Rust protection gray 750ml Rust protection gray 750ml

Universal metal primer in pebble gray for iron and steel, suitable for both indoor and outdoor areas. Lead and chrome free, weather resistant, flows well. Impact, scratch &~ waterproof.750ml

€11.95*

Content: 0.75 l (€15.93 / 1 l)

#FA64027

Safety chain 250 mm Safety chain 250 mm

with rings

€1.75*

Content: 0.25 m (€7.00 / 1 m)

#FA61445

Safety chain 300 mm Safety chain 300 mm

with hook

From €1.23*

Content: 0.3 m (€4.10 / 1 m)

to the product

#FA36306

Safety cord 260 mm Safety cord 260 mm

with screw eye and hook

€1.25*

Content: 0.26 m (€4.81 / 1 m)

Sicherheitsklappstecker, mit Sicherheitsraste

#132645

Rübig Safety linchpin Rübig, with safety catch Safety linchpin Rübig, with safety catch

B1 (mm): 14 B2 (mm): 49 D1 (mm): 10,5 D2 (mm): 32 L1 (mm): 45 L2 (mm): 66 Length (mm): 45 Ø (mm): .10,5

Conforms to DIN11023This linchpin cannot be bent or sheared when used correctly. By attaching the chain to the third hole, it can no longer pull up the spring clip. Drop-forged, hardened and galvanized, tested many times!

€4.90*

Variants from €4.80*

#FA1695

Faster Safety lock Safety lock

for all Faster multicouplers

€14.90*

Sicherheitsarretierung zu Multikuppler PSF

#FA121414

DNP Safety lock for multi-coupler PSF Safety lock for multi-coupler PSF

Safety lock for locking the locking lever when the lever is closed and open. The locking mechanism is suitable for all DNP multi-couplers in the PSF series. The set consists of a push button, 1 roller and 1 spring.

€30.90*

Sicherheitsarretierung Multikuppler PSQ und PSL

#FA67118

DNP Safety lock for multi-coupler PSQ and PSL Safety lock for multi-coupler PSQ and PSL

Safety lock for locking the locking lever when the lever is closed and open. The locking mechanism is suitable for all DNP multi-couplers in the PSQ and PSL series. The set consists of a push button, 2 rollers and 2 springs.

€30.90*

#FA116649

Faster Safety lock old version Safety lock old version

for all Faster multi-couplers

€14.00*

#43738

Frank Original Scharblatt Scharblatt

Version: right can be used instead of Pöttinger: 925.13.115.0, 925.13.116.0, 925.13.116.1

Interchangeable point share without interchangeable point

€65.00*

#55533

Scharblatt Scharblatt

Version: left can be used instead of Regent: 871.12.14-2

€29.90*

#8048

Frank Original Scharblatt Scharblatt

Version: left can be used instead of Pöttinger: 939.50.221.1

suitable for Landsberg-Pttinger, Einbck

€15.90*

#27075

iQparts Scharblatt Scharblatt

Version: right can be used instead of Pöttinger: 1903684, 940.95.022.0

€49.90*

#39235

Scharblatt Scharblatt

Version: right can be used instead of Pöttinger: 966.50.030.0

suitable for Landsberg-Pttinger, Einbck

€34.90*

#39243

Scharblatt suitable for Vogel and Noot Scharblatt suitable for Vogel and Noot

Version: left

Working width 430 mm

€19.50*

#FA46438

iQparts Scharspitze to Regent Scharspitze to Regent

€20.90*