Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Steckkupplung nach DIN 2353 mit Schottgewinde Serie PPV3

#20562

Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3 Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3

BG: 3 BG/DN: 3/DN13 Nominal size: DN13 SW (mm): 30 Series / pipe Ø: 8L Thread: M 14 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Sleeve, external thread, light series with bulkhead thread,push-pull design.

€12.99*

#4011

Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3 Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3

BG: 3 BG/DN: 3/DN13 Nominal size: DN13 SW (mm): 30 Series / pipe Ø: 12L Thread: M 18 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Plug, external thread, lightweight series with bulkhead thread, push-pull design.

€6.19*

Steckkupplung Stecker nach DIN 3852, Form Y, Serie PPV3

#27353

DNP Plug-in coupling according to DIN 3852, form Y, series PPV3 Plug-in coupling according to DIN 3852, form Y, series PPV3

Series / pipe Ø: 15L Thread: M 22 x 1,5

Plug, internal thread.Push-Pull design.

€4.99*

Steckkupplung Muffe nach DIN 3852, Form Y, Serie PPV3

#27352

Plug-in coupling according to DIN 3852, form Y, series PPV3 Plug-in coupling according to DIN 3852, form Y, series PPV3

Series / pipe Ø: 12L Thread: M 18 x 1,5

Sleeve, internal thread.Push-Pull design.

€10.90*

Steckkupplung DNP Serie PDV1, austauschbar mit vielen Herstellern wie Faster, Parker, Tema, usw.

#1128

DNP Plug-in coupling according to ISO standard series 'A' with IG series PAV1 Plug-in coupling according to ISO standard series 'A' with IG series PAV1

BG: 5 Flow rate (l/min): 189-280 Nominal size: DN25 Operating pressure (bar): 200 Pression max (bar): 250 SW (mm): 41 Thread: R 1 Zoll Ø E (mm): 52 Ø Z (mm): 34,35

Plug

€18.00*

Variants from €3.49*

#1127

DNP Plug-in coupling according to ISO standard series 'A' with IG series PAV1 Plug-in coupling according to ISO standard series 'A' with IG series PAV1

BG: 5 Flow rate (l/min): 189-280 Nominal size: DN25 Operating pressure (bar): 200 Pression max (bar): 250 SW (mm): 41 Thread: R 1 Zoll Ø E (mm): 52 Ø Z (mm): 34,35

sleeve

€32.00*

Variants from €6.99*

#105008

DNP Plug-in coupling DNP series PDV1, interchangeable with many manufacturers such as Faster, Parker, Tema, etc. Plug-in coupling DNP series PDV1, interchangeable with many manufacturers such as Faster, Parker, Tema, etc.

BG: 4 BG/DN: 4/DN20 Flow rate (l/min): 106-190 Nominal size: DN20 Operating pressure (bar): 250 Pression max (bar): 250 SW (mm): 34 Thread: R 3/4 Zoll Ø E (mm): 47 Ø Z (mm): 28,0

sleeve

€20.90*

Variants from €7.79*

#105007

BG: 2 BG/DN: 2/DN10 Flow rate (l/min): 23-46 Nominal size: DN10 Operating pressure (bar): 250 Pression max (bar): 350 SW (mm): 24 Thread: R 3/8 Zoll Ø E (mm): 34 Ø Z (mm): 19,0

Plug

€3.79*

Steckkupplung Eco-Quality BG3, Doppelpackung

#25549

Plug-in coupling Eco-Quality BG3, double pack Plug-in coupling Eco-Quality BG3, double pack

Series / pipe Ø: 15L Thread: M 22 x 1,5

According to ISO 7241-1A, push-pull versionsleeve

€16.49*

-21 %

#25533

Plug-in coupling Eco-Quality BG3, double pack Plug-in coupling Eco-Quality BG3, double pack

Series / pipe Ø: 15L Thread: M 22 x 1,5

According to ISO 7241-1A, push-pull versionplug

€7.79* €9.80* (20.51% saved)

#2488

DNP Plug-in coupling female according to DIN 3852, form Y, series PPV3 Plug-in coupling female according to DIN 3852, form Y, series PPV3

BG: 3 Flow rate (l/min): 45-90 Thread: G 1/2 Zoll

Quick-release coupling female in a push-pull design with an internal thread in accordance with DIN 3852. The female is sealed by a cone-seat valve with a strong spring to minimise oil leakage during coupling.

€10.90*

#134742

DNP Plug-in coupling male according to DIN 3852, form Y, series PPV3 Plug-in coupling male according to DIN 3852, form Y, series PPV3

Thread: G 3/4 Zoll

Quick-release coupling male with female thread to DIN 3852. The male is sealed by a cone-seat valve with a strong spring to minimise oil leakage during coupling.

€19.99*

Variants from €4.99*

Steckkupplungsstecker unter Druck kuppelbar nach DIN 2353 Serie PKK3

#121866

DNP Plug-in coupling plug can be coupled under pressure according to DIN 2353 series PKK3 Plug-in coupling plug can be coupled under pressure according to DIN 2353 series PKK3

BG/DN: 4/DN20 Series / pipe Ø: 22L Thread: M 30 x 2,0

Plug, external thread, lightweight series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

€25.90*

Variants from €8.75*

Steckkupplung Muffe BG3 DN13 mit 1/2 Zoll IG - Doppel-SPAR-Packung

#FA10801

Plug-in coupling sleeve BG3 DN13 with 1/2 IG - double SPAR pack Plug-in coupling sleeve BG3 DN13 with 1/2 IG - double SPAR pack

according to ISO standard series "~A"~ with IG series PAV1 sleeveNew: with dust protection

€9.80*

Steckkupplungsmuffe unter Druck kuppelbar nach DIN 2353 Serie PKK3

#121865

DNP Plug-in coupling sleeve can be coupled under pressure according to DIN 2353 series PKK3 Plug-in coupling sleeve can be coupled under pressure according to DIN 2353 series PKK3

BG/DN: 4/DN20 Series / pipe Ø: 22L Thread: M 30 x 2,0

Sleeve, external thread, light series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

€54.90*

Variants from €14.90*

Steckkupplung nach DIN 2353 - leichte Baureihe Serie PPV3

#59938

Plug-in couplings can be coupled under pressure according to DIN 2353 series PKK3 with bulkhead thread Plug-in couplings can be coupled under pressure according to DIN 2353 series PKK3 with bulkhead thread

L4 (mm): 26 Series / pipe Ø: 12L Thread: M 18 x 1,5

Sleeve, external thread, light series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

€17.00*

#60862

L4 (mm): 27 Series / pipe Ø: 15L Thread: M 22 x 1,5

Plug, external thread, lightweight series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

€9.99*

#FA21510

Plug-in fuse holder with cable Plug-in fuse holder with cable

with cable for standard blade fuse max. 30 amps

€6.90*

#FA25305

Plug-in ignition light switch Plug-in ignition light switch

Version: for plugging

€69.95*

Plungerzylinder Kolbenstange-Ø S = 30 mm

#18650

Plunger cylinder piston rod � S = 25 mm Plunger cylinder piston rod � S = 25 mm

Installation length (EL) (mm): 207 Stroke (mm): 100

Pressure force 883 kg at 180 bar, connection G M16x1.5, nominal pressure 250bar

€89.90*

Variants from €79.00*

#18820

Plunger cylinder piston rod � S = 30 mm Plunger cylinder piston rod � S = 30 mm

Installation length (EL) (mm): 607 Stroke (mm): 500

Pressure force 1272 kg at 180 bar, connection G M16x1.5, nominal pressure 250bar

€139.00*

Variants from €105.00*

#18842

Plunger cylinder piston rod � S = 40 mm Plunger cylinder piston rod � S = 40 mm

Installation length (EL) (mm): 312 Stroke (mm): 200

Pressure force 2261 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar

€152.00*

Variants from €109.00*

#18872

Plunger cylinder piston rod � S = 50 mm Plunger cylinder piston rod � S = 50 mm

Installation length (EL) (mm): 219 Stroke (mm): 100

Pressure force 3534 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar

€179.00*

#18917

Plunger cylinder piston rod � S = 60 mm Plunger cylinder piston rod � S = 60 mm

Installation length (EL) (mm): 322 Stroke (mm): 200

Pressure force 5089 kg at 180 bar, connection G M18x1.5, nominal pressure 250bar

€242.00*

Variants from €165.00*

Seite 116 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery