Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Halter Kunststoff für Steckkupplungsstecker

#FA28305

Plastic holder for plug-in coupling plugs Plastic holder for plug-in coupling plugs

BG 3. Serves to accommodate the uncoupled plug. Mounting thread M18x1.5mm.

€7.35*

Gleitlager aus Plastik ø27,3xø30/38x20mm, 324.2930

#FA111543

ESM Plastic plain bearing �27.3x�30/38x20mm, 324.2930 Plastic plain bearing �27.3x�30/38x20mm, 324.2930

Plastic plain bearing for rocker arm on double knife horizontal swing mower drive. Suitable for Busatis, Busatis bidux and ESM double knife bars.

€7.99*

#FA68487

Plastic screw cap Plastic screw cap

for oval eyelet 42 x 22 mm, hole spacing 52 mm

€1.80*

#FA4662

Plexiglas base for siphon with bayonet lock Plexiglas base for siphon with bayonet lock

Translucent Plexiglas base for the MZ siphon safety device. It is 160 mm deep.

€27.90*

#FA53503

Plexiglass base for siphon Plexiglass base for siphon

with internal thread, inner 110 mm

€19.90*

#FA53504

Plexiglass base for siphon Plexiglass base for siphon

with ring closure

€21.90*

#FA6723

Plowing deflector plate on the right Plowing deflector plate on the right

For applying fertilizer or cover crops to the furrow when plowing to the right. Made from stainless steel sheet.

€124.00*

#28580

iQparts Plowshares UN350 Plowshares UN350

Version: left

€65.00*

#28582

Frank Original Plowshares UN400 Plowshares UN400

Version: left

€65.00*

#112

iQparts Plowshares WS350 Plowshares WS350

Version: left

Suitable for plow body MPK400/430, UL430, ULST430, WS350/400, WY350/400

€62.90*

#3034

iQparts Plowshares WS400 Plowshares WS400

Version: right

€62.90*

#FA57356

Plug Plug

12/24 V, 3-pole,Use e.g. John Deere,...

€7.99*

#FA20080

Plug 12/24 V Plug 12/24 V

Plastic, 2-pole, DIN ISO 4165.

€7.99*

#FA117339

Plug 12/24V Plug 12/24V

Plastic 2-pole, with on/off switchfor cigarette lighter DIN ISO 4165

€8.95*

#FA20037

Plug 12/24V Plug 12/24V

Plastic 2-pole suitable for cigarette lighter, DIN ISO 4165.

€4.99*

#FA108270

Plug for alternator 3 pin Plug for alternator 3 pin

mit drei Kabelschuhen zum Crimpen

€8.99*

Stecker zu DNP Multikupplung R1/2 Zoll DN10

#FA60106

Plug for DNP multi-coupling R1/2 DN10 Plug for DNP multi-coupling R1/2 DN10

Male to fixed part with G1/2" internal thread

€21.00*

#FA66553

Plug holder Plug holder

for 7/13-pin plugs

€2.99*

Verschlussschraube, Withworth-Rohrgewinde

#5704

Plug screw, Withworth pipe thread Plug screw, Withworth pipe thread

Designation: VSTI R3/8

€2.00*

Variants from €1.79*

#FA46200

Plug to multi-coupling Plug to multi-coupling

6-pin for electrical cable entry on the tractor side.

€65.00*

Steckkupplungsmuffe unter Druck kuppelbar nach DIN 2353 Serie PKK3

#31565

Plug-in coupling according to DIN 2353 - heavy series PPV3 Plug-in coupling according to DIN 2353 - heavy series PPV3

Series / pipe Ø: 16S Thread: M 24 x 1,5

Sleeve, external thread,push-pull design

€9.99*

Steckkupplungsstecker unter Druck kuppelbar nach DIN 2353 Serie PKK3

#8822

Plug-in coupling according to DIN 2353 - heavy series PPV3 Plug-in coupling according to DIN 2353 - heavy series PPV3

Series / pipe Ø: 12S Thread: M 20 x 1,5

Plug, external thread,push-pull design.

€4.90*

#24328

Plug-in coupling according to DIN 2353 - lightweight series PPV3 Plug-in coupling according to DIN 2353 - lightweight series PPV3

BG: 3 BG/DN: 3/DN13 Flow rate (l/min): 45-90 Nominal size: DN13 Operating pressure (bar): 250 SW (mm): 30 Series / pipe Ø: 10L Thread: M 16 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Sleeve, external thread,push-pull design.

€9.99*

#2489

DNP Plug-in coupling according to DIN 2353 - lightweight series PPV3 Plug-in coupling according to DIN 2353 - lightweight series PPV3

BG: 3 BG/DN: 3/DN13 Flow rate (l/min): 45-90 Nominal size: DN13 Operating pressure (bar): 250 SW (mm): 30 Series / pipe Ø: 12L Thread: M 18 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Plug, external thread,push-pull design.

€4.90*

Seite 115 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery