Agricultural machinery
All Products
Suitable for: Case-ICH (CNH Global), Case-Steyr (CNH Global), Claas, Fiat Powertrain, Iveco Motors, McCormick (Landini-Argo), New Holland Construction.
"~"~"~With the Steyr Plus 40 from Mot. No. 4932 "~"~"~
A: 93B: 62C: 71G: 3/4-16 UNFH: 114
A: 93B: 62C: 71G: 13/16-16 UNH: 142
with non-return valve
A: 93B: 62C: 71G: M 24x1.5H: 142
with non-return valve
A: 93B: 62C: 71G: 1-12 UNFH: 157
A: 93B: 62C: 71G: 1-12 UNFH: 170
A: 93B: 62C: 71G: 3/4-16 UNFH: 177
A: 93B: 62C: 71G: 1-12 UNFH: 210
"~"~"~At Steyr Plus 40 up to Mot. No.: 4931"~"~"~A: 94B: 34C: 34H: 120
Suitable for: MF20, 25, 30-FE35, MF35 up to BJ 12/58-MF65 from serial no. 525039-MF130, 133-MF135 from Mot. No. 152UA355232D-MF148, 152, 152MKII up to Mot. No. 152UA10572DS-MF158, 158MKIII up to Mot. No. 203UA80190D, MF165 engine AD4.203 from serial no. 356953.
The oil level indicators or level indicators made of plastic are suitable for checking the oil level in tanks and hydraulic systems. A metal housing protects the indicators against external mechanical stress.The polyamide material used has high mechanical strength and resistance to oil, lubricants, solvents, gasoline and most chemicals.The maximum operating temperature is 100C.
The oil level indicators or level indicators made of plastic are suitable for checking the oil level in tanks and hydraulic systems. A metal housing protects the indicators against external mechanical stress.The polyamide material used has high mechanical strength and resistance to oil, lubricants, solvents, gasoline and most chemicals.The maximum operating temperature is 100C.
The plastic oil level indicators or level indicators are suitable for checking the oil level in tanks and hydraulic systems.The polyamide material used has high mechanical strength and resistance to oil, lubricants, solvents, gasoline and most chemicals.The maximum operating temperature is 100C.
Suitable for Steyr T190
O-ring for the oil filler neck when venting through the oil filler cap Part number: 103 Dimensions: O-ring 35x5
Version: 3 cylinder engine
When machines and devices are switched off, the hydraulic lines are often under residual pressure or, for example, pressure has built up due to heating due to solar radiation. Coupling to the tractor hydraulics is then difficult or completely impossible. The hydraulic connector is then hit against a solid object so that the valve opens and the pressure is reduced. This causes the hydraulic oil to spray in all directions and hydraulic oil also enters the ground. In the long run, the coupling nipple at the front of the plug is also damaged.With the oil pressure drain pliers, the excess pressure in the hydraulic line at the plug is controlled, released safely and in an environmentally friendly manner. There are no more spilled workplaces and oily clothes!
Oil pressure gauge 60mm suitable for Steyr T180
Unser Produktleiter
Werner Meixner
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.