Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Mähmesser AEBI TT33 Mähtrac mit Frontmähwerk Bidux, Busatis Doppelmessermähwerk 1205 Bidux

#FA2216

Schröckenfux Mower blade AEBI TT33 Mowtrac with front mower Bidux, Busatis double knife mower 1205 Bidux Mower blade AEBI TT33 Mowtrac with front mower Bidux, Busatis double knife mower 1205 Bidux

Upper blade, 27 bladesOverall length including blade head: 1975 mmLength of blade back: 1884 mmBlade head 5840.040.01, 345.0550 Blade head projection beyond blade back: 90 mm Blade head length: 400 mm Blade head pin diameter: 18 mm Blade head viewed in the direction of travel: leftTotal number of blades: 27, including 5 mushroom blades Position of the mushroom blades relative to the blade head 3rd, 9th, 15th, 21st and 25th bladesBlade spacing (centre to centre): 70 mmESM No. 262.6130Busatis Nr. 5461.500.65, 5460.500.65

€349.00*

#FA25669

Schröckenfux Mower blade back 135 cm Mower blade back 135 cm

2 threaded holes LA=100 mm.Suitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

€37.90*

#FA923

Schröckenfux Mower blade back 137 cm Mower blade back 137 cm

4 threaded holes M8 LA=178/100 mmSuitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

€37.90*

#FA10181

Schröckenfux Mower blade back 145 cm, 19 blades Mower blade back 145 cm, 19 blades

2 threaded holes M8 LA=152.4 mmSuitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

€40.90*

#FA10144

Schröckenfux Mower blade back 160 cm, 21 blades Mower blade back 160 cm, 21 blades

2 threaded holes M8 LA=152.4 mmSuitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

€42.90*

#FA41390

Schröckenfux Mower blade back, 160 cm, 21 blades Mower blade back, 160 cm, 21 blades

€42.90*

#FA41392

Schröckenfux Mower blade back, 190 cm, 25 blades Mower blade back, 190 cm, 25 blades

€49.90*

Mähmesserklinge DIN 75 3-Loch, oben versenkt

#FA34730

Schröckenfux Mower blade blade DIN 75 3-hole, recessed at the top Mower blade blade DIN 75 3-hole, recessed at the top

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

€1.75*

Mähmesserklinge DIN 80, 3-Loch, linke Bohrung 8,4mm

#FA41000

Schröckenfux Mower blade blade DIN 80, 3-hole, left hole 8.4mm Mower blade blade DIN 80, 3-hole, left hole 8.4mm

linke Bohrung 8,4 mm, gezahntPassend zu Type RM58, 158, 110, 111, 111S, 112, 131.

€1.59*

Mähmesserklinge DIN 80, 3-Loch, rechte Bohrung 8,4mm

#FA23326

Schröckenfux Mower blade blade DIN 80, 3-hole, right hole 8.4mm Mower blade blade DIN 80, 3-hole, right hole 8.4mm

right hole 8.4 mm, serratedSuitable for type RM58, 158, 110, 111, 111S, 112, 131.

€1.59*

Mähmesserklinge glatt mit Pilz, anstelle von Busatis bidux 5802.054.91, 267.1171

#FA39015

Schröckenfux Mower blade blade smooth with mushroom, instead of Busatis bidux 5802.054.91, 267.1171 Mower blade blade smooth with mushroom, instead of Busatis bidux 5802.054.91, 267.1171

Mower knife blade with mushroom suitable for Busatis bidux double knife mowers.Quality product from Austria from Schrckenfux.

From €4.72*

to the product

Mähmesserklinge glatt mit Pilz, anstelle von Busatis GB2731U, 5802.011.01, 267.1181

#FA39012

Schröckenfux Mower blade blade smooth with mushroom, instead of Busatis GB2731U, 5802.011.01, 267.1181 Mower blade blade smooth with mushroom, instead of Busatis GB2731U, 5802.011.01, 267.1181

Mower knife blade with mushroom suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Quality product from Austria from Schrckenfux.

From €3.95*

to the product

Mähmesserklinge glatt, anstelle von Busatis bidux 5802.053.01, 344.1551

#FA39014

Schröckenfux Mower blade blade smooth, instead of Busatis bidux 5802.053.01, 344.1551 Mower blade blade smooth, instead of Busatis bidux 5802.053.01, 344.1551

Mower blade blade suitable for Busatis bidux double blade mowers.Quality product from Austria from Schrckenfux.

From €2.44*

to the product

Mähmesserklinge glatt, anstelle von Busatis GB2730, 5802.009.01, 344.1511

#FA39011

Schröckenfux Mower blade blade smooth, instead of Busatis GB2730, 5802.009.01, 344.1511 Mower blade blade smooth, instead of Busatis GB2730, 5802.009.01, 344.1511

Mower blade blade suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Quality product from Austria from Schrckenfux.

From €2.11*

to the product

Mähmesser Busatis Doppelmessermähwerk 1205 Bidux

#FA56717

Schröckenfux Mower blade Busatis double blade mower 1205 Bidux Mower blade Busatis double blade mower 1205 Bidux

Bottom knife, 21 blades

€319.00*

#FA56716

Schröckenfux Mower blade Busatis double blade mower 1205 Bidux Mower blade Busatis double blade mower 1205 Bidux

Upper knife, 24 blades

€335.00*

Mähmesserklinge D2002R/76 anstelle BCS, Reform 563.590150

#FA47635

Schröckenfux Mower blade D2002R/76 instead of BCS, Reform 563.590150 Mower blade D2002R/76 instead of BCS, Reform 563.590150

Mower blade blade from Austrian production. The rivet holes have a countersink on the underside.

From €1.07*

to the product

Mähmesserklinge DIN 80 2-Loch, oben versenkt

#FA52973

Schröckenfux Mower blade DIN 80 2-hole, recessed at the top Mower blade DIN 80 2-hole, recessed at the top

Suitable for type Refom RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

€1.50*

Mähmesserklinge DIN 80 3-Loch, oben versenkt

#FA12171

Schröckenfux Mower blade DIN 80 3-holes, recessed at the top Mower blade DIN 80 3-holes, recessed at the top

Side hole on the left, 11 mm

€1.75*

Mähmesser ESM 107cm 21 Klingen mit Verstärkungsleiste zu Universalbalken C

#FA22779

ESM Mower blade ESM 107cm 21 blades with reinforcement strip for universal beam C Mower blade ESM 107cm 21 blades with reinforcement strip for universal beam C

Mower blade ESM 107cm 21 blades for universal bar C. With reinforcement strip length 253mm and thickness 2.5mm. 2 threaded holes M8 with hole spacing 101.6mm and 4 guide strips over 2. &~ 3rd Blade, 7th &~ 8th Blade, 14th &~ 15th Blade and 19th &~ 20. Blade. Suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

€215.00*

Mähmesser ESM 117cm 23 Klingen zu Universalbalken C

#FA12762

ESM Mower blade ESM 117cm 23 blades for universal bar C Mower blade ESM 117cm 23 blades for universal bar C

Mower blade ESM 117cm 23 blades for universal bar C. 2 threaded holes M8 with hole spacing 101.6mm and 4 guide strips over 2. &~ 3rd blade, 8th &~ 9th Blade, 15th &~ 16th Blade and 21st &~ 22. Blade. Original ESM mower blade suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

€219.00*

Mähmesser ESM 122cm 24 Klingen Hobby-Schwinghebel-Balken

#FA56399

ESM Mower blade ESM 122cm 24 blades hobby rocker arm bar Mower blade ESM 122cm 24 blades hobby rocker arm bar

Mower blade ESM 122cm 24 blades for hobby bar with rocker arm. With reinforcement strip length 305mm and thickness 5.5mm, 4 threaded holes M8, hole spacing 152.4mm and 101.6mm, suitable for Bucher M300 and Irus BM260, original number ESM 249.0930. With 4 pin supports with mushrooms for hanging the rocker arms. Position of the pin carriers between 2nd &~ 3rd blade, 8th &~ 9th Blade, 16th &~ 17th Blade and 22nd &~ 23 blade.

€265.00*

Mähmesser ESM 137cm 27 Klingen zu Universalbalken C

#FA6751

ESM Mower blade ESM 137cm 27 blades for universal bar C Mower blade ESM 137cm 27 blades for universal bar C

Mower blade ESM 137cm 27 blades for universal bar C. 2 threaded holes M8 with hole spacing 101.6mm and 6 guide strips over 2. &~ 3rd blade, 6th &~ 7th Blade, 10th &~ 11th Blade, 17th &~ 18th Blade, 21st &~ 22nd Blade and 25th &~ 26. Blade. Original ESM mower blade suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

€262.00*

Mähmesser ESM 137cm 27 Klingen mit Verstärkungsleiste zu Universalbalken C

#FA12764

ESM Mower blade ESM 137cm 27 blades with reinforcement bar for universal beam C Mower blade ESM 137cm 27 blades with reinforcement bar for universal beam C

Mower blade ESM 137cm 27 blades for universal bar C. With reinforcement bar length 253mm and thickness 2.5mm. 2 threaded holes M8 with hole spacing 101.6mm and 6 guide strips over 2. &~ 3rd blade, 6th &~ 7th Blade, 10th &~ 11th Blade, 17th &~ 18th Blade, 21st &~ 22nd Blade and 25th &~ 26. Blade. Suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

€299.00*

Seite 101 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery