Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Mähmesser 190cm, 25 Klingen DIN 75, anstelle von Aebi AM28289/1

#15179

Schröckenfux Mower blade 190cm, 25 blades DIN 75, instead of Aebi AM28289/1 Mower blade 190cm, 25 blades DIN 75, instead of Aebi AM28289/1

Version: gezahnt

25 blades DIN 75, 6 cleaning plates AM8731/2

€157.00*

Mähmesser 190cm, 25 Klingen DIN 80, anstelle von Bucher H150.043.790

#FA4714

Schröckenfux Mower blade 190cm, 25 blades DIN 80, instead of Bucher H150.043.790 Mower blade 190cm, 25 blades DIN 80, instead of Bucher H150.043.790

25 blades DIN 80, 6 blades DIN 80 recessed at the top, 4 cleaning plates

€115.00*

Mähmesser 200cm, 25 Klingen anstelle Steyr-PHANTOM 192720612

#FA7835

Schröckenfux Mower blade 200cm, 25 blades, instead of Steyr-PHANTOM 192720612 Mower blade 200cm, 25 blades, instead of Steyr-PHANTOM 192720612

Mower blade suitable for Steyr original Phantom cutter bars. The mower blade has 25 blades and is supplied complete with the cutter head 192720212.25 blades 192720252 serrated, 1 spring plate 192720295, 1 cutter head 192720212Austrian quality product

€215.00*

Mähmesser 230cm zu Reform Metrac 2000, 2002, 2004, 3000

#FA16002

Schröckenfux Mower blade 230cm for Reform Metrac 2000, 2002, 2004, 3000 Mower blade 230cm for Reform Metrac 2000, 2002, 2004, 3000

Upper knife 30 blades, including 6 mushroom blades

€425.00*

#FA15998

Schröckenfux Mower blade 230cm for Reform Metrac 2000, 2002, 2004, 3000 Mower blade 230cm for Reform Metrac 2000, 2002, 2004, 3000

Bottom knife 31 blades, including 5 mushroom blades and 1 end blade

€398.00*

Mähmesser 250cm, 33 Klingen DIN 75, anstelle von Aebi AM28494/1

#FA107664

Schröckenfux Mower blade 250cm, 33 blades DIN 75, instead of Aebi AM28494/1 Mower blade 250cm, 33 blades DIN 75, instead of Aebi AM28494/1

33 blades DIN 75, 6 cleaning plates AM8731/2

€149.00*

Mähmesser 5' / 163cm, 20 Klingen DIN 80 mit 5 Reinigungsplatten, anstelle STEYR 1800720613, passend zu T80 - 180

#FA7820

Schröckenfux Mower blade 5' / 163cm, 20 blades DIN 80 with 5 cleaning plates, instead of STEYR 1800720613, suitable for T80 - 180 Mower blade 5' / 163cm, 20 blades DIN 80 with 5 cleaning plates, instead of STEYR 1800720613, suitable for T80 - 180

Mowing blade suitable for Steyr original cutter bars. The mowing knife has 20 blades DIN 80 with 5 cleaning plates 1800720018. The cleaning plates are riveted on the 4th, 7th, 11th, 15th and 19th blade, starting from the knife head. The knife head blade is not counted as a blade. The knife head 180a720056 is made of malleable cast iron.Austrian quality product

€185.00*

Mähmesser 5 Zoll / 163 cm, 20 Klingen DIN 80 gezahnt, davon 5 Führungsklingen GB543 anstelle von Busatis M14

#FA41365

Schröckenfux Mower blade 5' / 163cm, 20 DIN 80 serrated blades, 5 of which are GB543 guide blades instead of Busatis M14 Mower blade 5' / 163cm, 20 DIN 80 serrated blades, 5 of which are GB543 guide blades instead of Busatis M14

Mower blade suitable for Busatis-Gebusa cutter bar BK 001, BK 003, BK 004, BK 006, BK 007, BK 008, BK 009, BK 015 and BK 016. The mower blade has 20 blades DIN 80. Of these, 5 blades are guide blades GB 543. The guide blades are the 5th, 9th, 13th, 17th and 19th blades starting from the knife head. The knife head blade is not counted as a blade.Austrian quality product

€179.00*

Mähmesser 76 cm, 15 Klingen, mit gezahnter Aufnahme, anstelle von BCS & Reform B590.48928.0

#FA113381

Mower blade 76cm, 15 blades, with serrated holder, instead of BCS & Reform B590.48928.0 Mower blade 76cm, 15 blades, with serrated holder, instead of BCS & Reform B590.48928.0

15 serrated blades, 4 guide rails, B590.48928.0

€59.00*

#FA126048

ESM Mower blade 91cm, 18 blades, for universal bar SC, 2 threaded holes M8, hole spacing 101.6 mm, instead of ESM 248.1670 Mower blade 91cm, 18 blades, for universal bar SC, 2 threaded holes M8, hole spacing 101.6 mm, instead of ESM 248.1670

Mower blade with 18 blades suitable for ESM universal bar SC with hinged blade holder. The cutter head is attached to the blade with 2 M8 bolts at a distance of 101.6 mm. The cutter head attachment is from the centre. There are 4 guide rails on the mower blade. Guide rails are attached to the cutter blade. The guide rails are positioned over the 1st/2nd, 5th/6th, 13th/14th and 17th/18th blades.

€198.00*

Mähmesser 92cm 18 Klingen zu Universalbalken C

#FA12759

ESM Mower blade 92cm 18 blades for universal bar C Mower blade 92cm 18 blades for universal bar C

Mower blade ESM 92cm 18 blades for universal bar C. 2 threaded holes M8 with hole spacing 101.6mm and 4 guide strips above 1. &~ 2nd blade, 6th &~ 7th Blade, 12th &~ 13th Blade and 17th &~ 18. Blade. Original ESM mower blade suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

€195.00*

Mähmesser 97cm 19 Klingen anstelle ESM 249.0430, 4 Gewindelöcher M8 mit Lochabstand 101,6/203,2mm, mit Verstärkungsleiste

#FA40224

ESM Mower blade 97cm 19 blades instead of ESM 249.0430, 4 threaded holes M8 with hole spacing 101.6/203.2mm, with reinforcement strip Mower blade 97cm 19 blades instead of ESM 249.0430, 4 threaded holes M8 with hole spacing 101.6/203.2mm, with reinforcement strip

Mower blade ESM 97cm 19 blades for universal bar C. The 4 threaded holes M8 have a hole spacing of 101.6mm and 203.2mm. The 4 guide bars are above the 2nd &~ 3rd blade, 6th &~ 7th Blade, 13th &~ 14th Blade and 17th &~ 18. Blade mounted. Original ESM mower blade suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

€205.00*

Mähmesser 97cm 19 Klingen mit Verstärkungsleiste zu Universalbalken C

#FA3907

ESM Mower blade 97cm 19 blades with reinforcement bar for universal beam C Mower blade 97cm 19 blades with reinforcement bar for universal beam C

Mower blade ESM 97cm 19 blades for universal bar C. With reinforcement bar length 253mm and thickness 2.5mm. 2 threaded holes M8 with hole spacing 101.6mm and 4 guide strips over 2. &~ 3rd blade, 6th &~ 7th Blade, 13th &~ 14th Blade and 17th &~ 18. Blade. Suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

€207.00*

Mähmesser 97 cm, 19 Klingen 59015, mit 4 Führungsleisten und glatter Aufnahme, 2 Gewindelöcher M8, passend zu Aebi, BCS, Reform

#FA76031

Mower blade 97cm, 19 blades 59015, with 4 guide bars and smooth holder, 2 threaded holes M8, suitable for Aebi, BCS, Reform Mower blade 97cm, 19 blades 59015, with 4 guide bars and smooth holder, 2 threaded holes M8, suitable for Aebi, BCS, Reform

19 blades 59015, 4 guide strips, B590.59031.0

€59.00*

Mähmesser 97 cm, 19 Klingen, zu Universalbalken SC, 2 Gewindelöcher M8, Lochabstand 101,6 mm, anstelle ESM 248.1770

#FA97677

ESM Mower blade 97cm, 19 blades, for universal bar SC, 2 threaded holes M8, hole spacing 101.6 mm, instead of ESM 248.1770 Mower blade 97cm, 19 blades, for universal bar SC, 2 threaded holes M8, hole spacing 101.6 mm, instead of ESM 248.1770

Mower blade with 19 blades suitable for ESM universal bar SC with hinged blade holder. The cutter head is attached to the blade with 2 M8 screws at a distance of 101.6 mm. In the centre of the two M8 threaded holes is a hole with Ø 8.1mm to accommodate the centring bolt on the cutter head. In the area of the threaded holes, the rivet heads are ground flat. There are 4 guide rails on the mower blade. Guide rails are attached to the mower blade. The guide rails are positioned over the 2nd/3rd, 6th/7th, 13th/14th and 17th/18th blades.

€192.00*

Mähmesser 97 cm, 19 Klingen, mit gezahnter Aufnahme, anstelle von BCS & Reform B590.48926.0

#FA79869

Mower blade 97cm, 19 blades, with serrated holder, instead of BCS & Reform B590.48926.0 Mower blade 97cm, 19 blades, with serrated holder, instead of BCS & Reform B590.48926.0

19 serrated blades, 4 guide rails, B590.48926.0

€65.00*

Mähmesser AEBI 83, AM9, AM20, CC66 Normalschnitt mit Mitnehmerplatte AM8880/1

#FA64881

Schröckenfux Mower blade AEBI 83, AM9, AM20, CC66 normal cut with driver plate AM8880/1 Mower blade AEBI 83, AM9, AM20, CC66 normal cut with driver plate AM8880/1

25 blades DIN 75, 8 cleaning plates AM8731/2, 2 cleaning plates AM23328/2

€169.00*

#FA2048

Schröckenfux Mower blade AEBI 83, AM9, AM20, CC66 normal cut with driver plate AM8880/1 Mower blade AEBI 83, AM9, AM20, CC66 normal cut with driver plate AM8880/1

19 blades DIN 75, 6 cleaning plates AM8731/2, 2 cleaning plates AM23328/2

€147.00*

#FA2051

Schröckenfux Mower blade AEBI 83, AM9, AM20, CC66 normal cut with driver plate AM8880/1 Mower blade AEBI 83, AM9, AM20, CC66 normal cut with driver plate AM8880/1

21 blades DIN 75, 8 cleaning plates AM8731/2, 2 cleaning plates AM23328/2

€167.00*

Mähmesser AEBI A33/A35 AM8 mit Mitnehmerplatte AM6/1

#FA7840

Schröckenfux Mower blade AEBI A33/A35 AM8 with driver plate AM6/1 Mower blade AEBI A33/A35 AM8 with driver plate AM6/1

19 blades DIN 80, 4 cleaning plates 1250

€99.00*

#FA7842

Schröckenfux Mower blade AEBI A33/A35 AM8 with driver plate AM6/1 Mower blade AEBI A33/A35 AM8 with driver plate AM6/1

21 blades DIN 80, 6 cleaning plates 1250

€129.00*

Mähmesser AEBI A71/A73/A81 mit Mitnehmerplatte AM8880/1

#FA7848

Schröckenfux Mower blade AEBI A71/A73/A81 with driver plate AM8880/1 Mower blade AEBI A71/A73/A81 with driver plate AM8880/1

21 blades DIN 75, 6 cleaning plates AM8731/2

€139.00*

#FA7846

Schröckenfux Mower blade AEBI A71/A73/A81 with driver plate AM8880/1 Mower blade AEBI A71/A73/A81 with driver plate AM8880/1

19 blades DIN 75, 4 cleaning plates AM8731/2

€119.00*

Mähmesser AEBI TT33 Mähtrac mit Frontmähwerk Bidux, Busatis Doppelmessermähwerk 1205 Bidux

#FA26404

Schröckenfux Mower blade AEBI TT33 Mowtrac with front mower Bidux, Busatis double knife mower 1205 Bidux Mower blade AEBI TT33 Mowtrac with front mower Bidux, Busatis double knife mower 1205 Bidux

Bottom knife, 24 bladesOverall length including cutter head: 2025 mmLength of cutter back: 1995 mmCutter head 5840.055.01, 345.0770 Cutter head projection beyond cutter back: 26 mm Cutter head length: 400 mm Blade head spigot diameter: 18 mm Blade head viewed in the direction of travel: leftTotal number of blades: 24, of which 4 are mushroom blades Position of the mushroom blades relative to the blade head 6th, 11th, 16th and 20th bladesBlade spacing (centre to centre): 84 mmESM No. 265.6130Busatis No. 5471.500.65

€332.00*

Seite 100 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery