Fahrzeugbau

For radiator hood, loose - without bracket.

Increased service life thanks to carcass design, top quality, (without tube)

Metal-polymer plain bearing CSB20 to ISO 3547 (DIN 1494) with embossed lubrication pockets in a low-maintenance design. The plain bearing bushes are equipped with a low-maintenance sliding material for use in mixed friction applications with grease or oil lubrication. This means that the plain bearings must be lubricated with grease or oil. A hole is provided on the plain bearing for this purpose. The embossed lubrication pockets can optimally absorb the lubricant (grease, oil).The plain bearing bushes are characterised by high wear resistance, low friction and good damping properties. The bushings are also insensitive to shocks. The low friction coefficients, good wear resistance and reliable load capacity of the bearing ensure suitable use in rotating and oscillating movements.The range of applications for plain bearing bushes extends to agricultural equipment, construction machinery, industrial trucks, lifting equipment, hydraulic cylinders and motors as well as steering knuckle bearings, steering gears, power steering and pedal bearings.

Versatile - holding force per magnet approx. 20 kg, magnet diameter 75 mm

For coupling front and rear implements, reinforced version.

Suitable for all tractor types~ Material: plastic, PE, UV stability, good cold flexibility and heat resistance, high tear resistance, good tensile strength, temperature range: -40C to +80C ~< br> ~

clockwise, for loading wagons, manure spreaders, rotary haymakers, rakes,...

hot-dip galvanized, with automatic reversing system, with support wheel console

for square tube 70 mm, hot-dip galvanized, with automatic reversing system, with support wheel console

Standard version

Galvanized, with chain, 14mm , for lower link stabilizers, bolt length approx. 54mm

Galvanized, with chain, 16mm , for lower link stabilizers, bolt length approx. 70mm

Drop-forged shaft, galvanized, white chromated.

For screwing on.Type B = hole 23 mm

For screwing on.Type A = hole 20 mm

for oval eyelet 42 x 22 mm, hole spacing 52 mm

Grip eyelet pliers18 eyelet impression devices (interchangeable)Eyelets of various sizes10mm snap fasteners for riveting and screwingDelivered in a practical plastic display cassette.

for car trailers

Gummihandgriff zum Aufstecken

Shaft made of drop-forged steel, galvanized, yellow chromated, for catch can

Quick-release fastener with side lever for car towbars. The base plate with 4 screw holes (100x43mm) makes it easy to add a tray, box or similar.

for 8mm rope

Increased service life thanks to carcass design (without tube)

Fine-groove design (for agricultural machinery and equipment up to max. 40 km/h), wheel with deep groove ball bearing