Fahrzeugbau

Total length 160 mm, ideal for attaching tarpaulins, nets, etc.

8 mm, gray, price per meter,incl. Cutting service

2 pieces each with 45, 60, 80 and 100 cm length.

galvanized, A:30mm, B:10mm

B:10mm

Inexpensive 103-piece eyelet assortment including assembly tools. Contents: 50 pieces of eyelets 10x20x6 mm, 50 pieces of eyelet washers 10x20x6 mm and 1 piece each of punch, anvil and impact punch

260 pieces, in a practical PVC case. Indispensable for everyday needs. Contents: Folding cotter pins, spring cotter pins, split pins, heavy-duty clamping sleeves, locking rings, sealing rings, tension springs, compression springs in various sizes.

Hot-dip galvanized, suitable for screwing onto frames or side walls.

Water filling and emptying fitting for tractor tiresfor 1/2" hoseFill your tractor/tractor tires with water quickly and easily. The Hanauer Maus makes it possible. The venting valve with internal thread and venting hose is screwed onto the tire valve. Via the hose nozzle of the filling fitting you can connect a 1/2 inch water hose.Why fill water into tractor tires?When working with the front loader, it can happen that the tractor loses grip on the rear axle. Instead of additional weights that put pressure on the rear axle, we recommend adding water to fill the tractor tires. The center of gravity shifts downwards due to the water in the tractor tires. This also reduces the risk of the tractor tipping over when driving diagonally on slopes.How is the Hanauer Maus used?First jack up the tractor and loosen the valve insert carefully with a valve screwdriver. Once the air has escaped, you can safely remove the valve insert. Now turn the tire until the valve is at around 11 o'clock. After you have inserted the ventilation hose into the valve body, screw on the Hanauer Maus. In the next step, attach the 1/2 inch water hose to the hose nozzle of the Hanauer Maus. Once the optimal level has been reached, you can fill the tractor tire with air. To do this, screw in a valve insert suitable for air and water. Empty tractor tires with the Hanauer MouseJack up your tractor and turn the wheel until the valve body is at the lowest point. Now remove the valve insert and let the water drain out. To completely empty the tractor wheel, take the Hanauer Maus and screw it onto the valve body. Now remove the hose nozzle and screw the valve insert into the internal thread of the Hanauer Maus. Now connect the compressed air tire inflator to press the remaining water out of the vent valve.How the Hanauer Maus worksWhile you are filling your tractor tire with water, the air can escape through the vent valve at the same time. As soon as water comes out of the opening, the filling process is complete. If the Hanauer Maus is removed, the required 25% air remains in the tire.

​Lightweight silage-hay knife, cuts bale twine, net and plastic film. Can also be used to cut open fertiliser sacks, hay bales, silage bales, etc. Folding blade with safety cover. Large handle enables easy handling even when wearing work gloves.Weight approx. 500 g, length 760 mm.

Pack of 50, mixed.Fittings:Spring connectors:2 mm - 5 pieces3 mm - 10 pieces5 mm - 10 pieces 6 mm - 5 piecesHinged pins4.5 mm - 5 pieces6 mm - 5 pieces8 mm - 5 pieces10.5 mm - 5 pieces

With high strength.

With high strength

10 pieces, assorted.

galvanized, A:40mm, B:20mm, C:10mm

Galvanized version

With discus lock and 2 keys. Suitable for all ball couplings.

For oval eyelet 40x22 mm.

Support load 175 kg, round outer tube 48 mm, (without clamp holder).

Suitable for Stabilus LIFT-O-MAT. Complete with fastening elements, end position cushioned (no damage to the hinges).This is just a small excerpt from the LIFT-O-MAT gas pressure spring program. We can supply you with the right gas pressure spring for many tractor types. Please provide us with the 6-digit Stabilus number that is printed on the gas spring.

For universal use, chrome-plated piston rod. Can be used individually thanks to various fastening elements.Hydraulic damping! Cylinder: 22mm, piston rod: 10mm, thread: M8The gas spring must be installed with the piston rod facing downwards.