Pumps, tanks & accessories

Transition piece from Storz C to Geka coupling.

Practical hand pump for filling grinders and similar devices, even in hard-to-reach places. Pumps oils up to SAE 140. Pump made of steel and impact-resistant die-cast zinc. Flow rate approx. 3L/min (60 strokes), suction pipe length 500mm, outlet hose 1500mm incl. steel outlet elbow. Complete with M60x5i barrel screw connection suitable for most 20L plastic canisters.

Practical trolley for urea solution (AUS 32) with 60l capacity. With integrated handle and carrying handles for easy and comfortable transport. It is pumped via a crank pump The large wheels (240mm) ensure easy handling even on terrain or on stairs.The nozzle holder is integrated, housing made of stainless steel and technopolymer.Independent of electrical energyTechnical data:Capacity: 60lLength of dispensing hose: 2.9mDelivery capacity: 0.38l/revFuel nozzle: manual nozzle

Universal pump with 0.37KW/0.5 HP 230 volt motor. Brass pump therefore suitable for food (not approved). Thanks to the use of Viton seals, this pump is suitable for media heated to temperatures up to 80C. The pump is therefore ideal for flushing systems or pipes with hot water. Delivery rate max. 35L/min, delivery height up to 30m = 3.0 bar, suction height max. 3.0m. Connections. 1 inch each on the suction and pressure sides. Weight 5 kg. Dimensions: 250x180x160m.

Self-priming pump (first filling required), power 370 W, approx. 28 l/min., delivery height approx. 20 m. hose connection 3/4?. ~

Suitable for all pumps with a maximum output of 1.0 KW/1.36 HP at 230V. Interrupts the power supply in the event of a lack of water. Cable length 10 m.

​Practical hand pump with 2" fine thread suitable for most 60/200L drums and various tanks. This self-priming pump pumps water, lubricants, oils, diesel, antifreeze etc. Not suitable forGasoline or concentrated acids or aggressive liquids. Delivery rate approx. 0.50 l p.stroke. Complete with telescopic suction pipe up to 98cm and 2m discharge hose. Simple pump for occasional use.

Practical universal pump for transferring/delivering fuels, oils, battery acid, distilled water, etc. Made of special plastic for universal use. Comes with a hand pump and 2 x 900 mm PVC hoses with an 8.0 mm inner diameter. Ideal for emergencies or very small flow rates.

Handy centrifugal pump for quickly and easily pumping liquids such as water, antifreeze, heating oil or diesel. Easy installation on barrels or tanks thanks to 2?AG and compact design. Flow rate up to 30 l/min. Complete with 6 m hose, 4 m connection cable, suction filter and manual nozzle, but without liter meter.

Handy centrifugal pump for quickly and easily pumping liquids such as water, antifreeze, heating oil or diesel. Easy installation on barrels or tanks thanks to 2?AG and compact design. Flow rate up to 35 l/min. Complete with 6 m hose, 4 m connection cable, suction filter and manual nozzle, but without liter meter.

?The universal pump is a classic self-priming side liquid ring pump with a star-shaped impellerThe special hydraulic type gives the pump exceptional self-priming performance, even when there is no continuous liquid flow in the suction state (air or other gases present).The pump is particularly for the transport of liquids such as WINE, MUST, SALT AND SOFT WATER, MILK, OIL, GAS OIL, whose viscosity is not above 30 degrees CENTISTOKES or above 4 degrees ENGLER, the liquids to be pumped must be neutral and neutral.Clean or contain in the suspension only one low percentage of solids (maximum 0.2-0.5%) - they must have a hardness and grain size that prevent damage to the inner pump surface - but a close-meshed filter can still be mounted on the suction line ~Technical Data:Flow: 5000 l/hourSelf-priming liquid ring pump with electric motorWithout bypass pump can be operated in 2 directionsSuitable for pumping food liquids such as water, wine, wort, etc.With standard NBR sealHose connection 30 mmElectrical connection: 230 V/50 HzDelivery height 15 mMotor : 650 W/1.0 HP, 1450 rpmMaximum temperature 35C

Brass pump with 0.9 kW/380 V, delivery rate max. 150 l/min. Connections 6/4?AG. Suitable for temperatures up to 120 C thanks to the special Viton seal.

Self-priming (when filled) electric pump, food-safe. Motor 340 watts / 230 volts, 2800 rpm, delivery rate max. 1700 l/h, delivery height max. 25 m (2.5 bar), suction height max. 6 meters, hose connection ". Can be used in both directions thanks to the practical rocker switch. Handy and inexpensive pump for pumping milk, wine, must, vinegar, etc.

Self-priming vane pump with 25 l/min. Suitable for oils up to SAE140, e.g. engine oil, gear oil but also rapeseed oil or diesel. Complete set including nozzle, 4 m pressure hose and suction line (1.6 m), including foot valve.

Extremely robust sewage pump with float switch. Motor: oil-filled submersible motor with 0.75 kW/230 volts. Flow rate 280 L/min, delivery height max. 9 m, solids up to 36 mm. Connection 2" IT, weight 23 kg. Robust pump for tough use and a long service life.With 10 m cable H07RN8-F , insulation class F, IP68.Maximum liquid temperature 50C, pH 6-10.Delivery volume at delivery head:1m - 300l/min2m - 277l/min3m - 252l/min4m 225l/min5m 198l/min6m 160l/min7m 120l/min8m 70l/minDimensions of the pump:

Extremely robust sewage pump with float switch. Motor: oil-filled submersible motor with 1.04 kW/1.4 HP, 230 volts. Flow rate 450 L/min, delivery height max. 9 m, solids up to 36 mm. Connection 2" IT, weight 27 kg. Robust pump for tough use and a long service life.

Submersible waste water pump with solid cast housing and stainless steel drive shaft. Suitable for grain sizes up to 55mm. Oil-filled submersible motor 1.5KW/2.0 HP 230 volts for optimal cooling under high loads. Output: max. 550L/min, delivery height max. 11 meters. Complete with float switch and 10m connection cable. Output: 2?IG. Hose and accessories such as Vortex 100.

Dirty water submersible pump with 750 watts/230 volts and float switch.Thanks to the high-quality INOX AISI 304 design, this pump has a very long service life and is also suitable for use with aggressive or salty liquids. Technical data: Delivery rate max.245L/min Delivery head: 8m (0.8 bar) Solids up to max.38 mm Dimensions: 370x195mm HxW/D Weight: 13kg Connection thread: 1-1/2" IG

Submersible sewage pumps for dirty water with solid bodies. Made from high quality and durable materials. 400 volt version without float switch.Pump housing and Vortex impeller made of gray cast ironDrive shaft made of stainless steelOil-filled submersible motor Oil-cooled double mechanical seal made of silicon carbide10 meter cable H07RN8-FThree-phase voltage with 400 volts 1.5KW/2.0HP Full motor protection according to user careIP 68 protection. Isolat. Class FMax. liquid temperature 40 C~ pH: 6 10~ max. density <~ 1100 kg/m3

Practical wall bracket to attach hoses and garden hoses to the wall to save space. ~Includes connecting screws for PA20, PA20SK, can be swiveled 90 degrees

suitable for hose reels

Complete with 7 m pressure hose ( 19 mm), 3 m suction hose ( 30 mm) as well as nozzle, filter and clamps.

Complete with 7 m pressure and 3 m suction hose as well as filter and nozzle.

Washing set for Kmag ZWP complete with 6M 3/4" hose, brass spray nozzle and screw connection