Pumps, tanks & accessories

Spacer, outlet extension with a length of approx. 11cm.2" on both sides - ideal problem solver for straight extensions.Connection to the IBC: S60x6 (DN50) IT - CoarseOutlet: S60x6 (DN50) AG - CoarseMeasured diameter: 55-62mm

Plastic tank made of high-quality UV-stabilized HDPE with a capacity of 1,000 l. The inner container is enclosed by a sturdy frame made of galvanized tubular steel. Easy transportation and safe standing thanks to installation on a plastic pallet that can be driven under (e.g. pallet truck). The tank is stackable, suitable for foodstuffs and is supplied complete with DN 225 lid and 2" outlet tap. Dimensions: W x H x D 1000 x 1180 x 1200 mm, Net weight approx. 52 kg.

This G1" bushing does not have to be countered from the inside and can therefore also be attached to inaccessible places. Required drill hole 43mm, outlet thread 1" AG fine

Tank bushing with outgoing IBC thread S60x6, which allows any additional IBC adapters to be attached.The opposite side has a G2" fine thread including seals and lock nut.Even without the lock nut, many different screw connections can be made with this adapter from G2" to S60x6 (e.g. screwing into IBC cover).

Ideal set for connecting 2 IBC tanks, consisting of:2x Camlock male part2x Camlock female coupling 38mm1x T-piece (DN40mm)3x pipe section (DN40mm)1x hose (DN40mm ), length 2m6x hose clampConnection to IBC: S60x6 (DN50) IT - coarseOutlet: hose, 40mm (DN40)Measured diameter: 55-62mm

​Use this practical connection set and the matching accessories to connect several IBCs togetherSet for quick connection of 2 IBC outletsCan be installed without tools Kit consisting of:2 adapters, 2“ coarse female thread to 1” fine male thread1 T-piece with anti-twist protection, 1"1 hose connector each, 1“ straight and 1” angled (90°)1.2 meters of DN 25 hose1 drain tap, 1"1 stepped hose clamp with connection option for 0.75“ / 1” and 1.25"

For screw connection on both sides of IBC water tanks with 1" fine external thread).

Adapter with small stopcock, suitable for the direct connection of " (approx. 13mm) hoses.Connection to IBC: S60x6 (DN50) female thread - coarseMeasured diameter: 55-62mm

IBC cover or sleeve to protect the contents against short-term temperature fluctuations and temperature peaks. ~Ideal for the transport of temperature-sensitive goods in IBC tanks.The metallized (AL) Film is extremely robust and offers the following advantages:Reflection of sunlight up to 97%Reduces air exchangeReduces short-term temperature fluctuations - extreme heat or Cold High quality with fabric sewn edges - not gluedLid opening removable with Velcro fastener - suitable up to DN 225 mmValve opening removable with Velcro fastenerThe entire front can be folded up using Velcro fasteners on the sides.Attention: ~NOT permanently UV-resistant!!!!It This is a consumable item!!!Only for transport and short-term storage. ~

This film is suitable for all standard 1000l IBC tanks.They offer excellent protection against UV radiation and allow the tank to be used to its full extent. Matching cutouts ensure accessibility on the front and back of the tank. It is also possible to remove contents using a precisely fitting tab. Ideal protection against algae formation, cloudiness and brittleness - save yourself time-consuming cleaning work and protect the tank from sunlight!

Original replacement tap for WERIT containers.This is mounted on the tank using a clamping ring and closes with the help of a sliding valve.Connection to the IBC: clamping ring 85mm (DN50)Outlet: S60x6 (DN50) AG Coarse

Y-adapter with click system (Gardena) and IBC connection adapter S60x6.Separately lockable outlets with " thread, including click system adapter.Variant with fixed nutConnection to the IBC: S60x6 (DN50) female thread - coarse Outlet: Click system ITMeasured diameter: 55-62mm

Standard adapter from S60x6 (2", DN50) to fine thread (IG) with suitable GEKA coupling (AG)Connection to IBC: S60x6 (DN50) IT - coarseOutlet: GEKA couplingMeasured diameter: 55 -62mm

Intake fitting for Kmag ZWP with 6m length. Complete with intake filter and float.

Galvanized, robust design

Metal version 1?IG.

If mounted directly on a diesel tank, an additional pump support is recommended.

The practical solution for refueling vehicles when used on construction sites or in the field! Urea solution is not a hazardous substance. No ADR approval is required for transport.Single-walled container made of polyethylene approved for AdBlueBelt guide for transport securityIntegrated forklift pocketsIntegrated carrying handlesCematic Blue diaphragm pump approx. 30l/min.4m dispensing hose DN 19Automatic dispensing valveDimensions (LxWxH) : 80x60x59 cmWeight: 23 kg

​The practical solution for refueling AdBlue. No ADR approval necessary. complete system with 12V with submersible pump CENTRI SP 30, with automatic nozzlesingle-walled tank made of polyethylene approved for AdBluebelt guides for transport safetyintegrated forklift pocketsintegrated carrying handlesSubmersible pump CENTRI SP 30, 12 V approx. 25 l/min, 4 m connection cable with pole clampsdispensing hose 4 mautomatic nozzle

The practical solution for refueling vehicles when used on construction sites or in the field! Urea solution is not a hazardous substance. No ADR approval is required for transport.Single-walled container made of AdBlue-approved polyethyleneBelt guide for transport securityIntegrated forklift pocketsIntegrated carrying handlesSubmersible pump CENTRI SP 30, 12V approx. 25l/min.4m connection cable with pole pliers4m dispensing hose DN 19Automatic nozzleDimensions (LxWxH): 118x80x71cmWeight: 36.3 kg

Mobile tank system according to ADR 1.1.3.1.c combined for diesel and AdBlue. Contents diesel 440 L, contents AdBlue 50 L. Each complete with 12V pump (40L/min diesel / 30L/min AdBlue) outlet hose and automatic nozzle. Fully assembled and with hinged lid for protection during transport or on site. Dimensions: 118x80x85cm LxWxH.

Storz multi-purpose jet lance with shut-off, connection size C or 52

Brass check valve for pipe installation in size 1 inch. With spring, York system.Ideal for longer suction lines to reduce pressure drop - the valve can also be used to extend or couple existing lines.

This complete yard filling station can be set up in just a few minutes and offers you the opportunity to refuel your vehicles cost-effectively and at any time. The system consists of a very high-quality and stable plastic container with integrated collecting tray and 2500 l capacity. The hinged lid with telescopic holder reliably protects the technology from the weather and ensures that this system is approved for outdoor installation.The system is fully equipped with a high-quality, self-priming diesel pump with 230 volts and a delivery rate of up to 72 l/min. The integrated hose reel with 8m diesel hose and the automatic nozzle ensure a high level of operating convenience and safety against overflowing when refueling. Of course, the professional system also offers a TW coupling with limit value transmitter, a fill level indicator and a venting cap.The integrated counter allows the tank quantity to be checked at any time.The system is subject to registration and has the general building authority approval Z-40.21-510 and can generally be used with little effort. In Switzerland:Please clarify in advance with your responsible authority (e.g. municipality) whether this tank fulfills the individual requirements for operation.A general approval for Switzerland is not given !!!!!Technical data: Dimensions: 120x180x180cm WxDxH, weight approx. 255 kg, Delivery: completely assembled.