Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA107977

Long fuel filter sight glass Long fuel filter sight glass

Bore 25mm

€10.95*

#FA728

Long goods sign 40x25 cm Long goods sign 40x25 cm

white-red, fluorescent edge, with chain

€18.95*

#FA7687

Long guide angle to inner shoe Long guide angle to inner shoe

€19.90*

#26464

Loose elastic band Loose elastic band

B (mm): 20 C (mm): 25 L (mm): 65

For radiator hood, loose - without bracket.

€1.75*

Halter lose passend zu Einböck Striegelzinke Ø 7 mm

#FA75020

Loose holder suitable for Einböck harrow tines Ø 7 mm Loose holder suitable for Einböck harrow tines Ø 7 mm

Loose plastic tine holder suitable for Einböck harrow tines with a wire thickness of 7 mm.

From €1.15*

to the product

Kreiselheuer- und Motormäherreifen lose, 3-rillig V60

#34846

Loose rotary hay and motor mower tires, 3-groove V60 Loose rotary hay and motor mower tires, 3-groove V60

Dimension: 4.00 x 8 Width (mm): 110 Ø: 415

Increased service life thanks to carcass design, top quality, (without tube)

€41.85*

Variants from €18.95*

Kreiselheuer- und Motormäherreifen lose, Stollenprofil V67

#1289

Loose rotary hay and motor mower tires, lug profile V67 Loose rotary hay and motor mower tires, lug profile V67

Dimension A x B (inch): 4.00 x 8

Increased service life thanks to carcass design (without tube)

€37.50*

#FA39666

Loose securing strap, 195 mm Loose securing strap, 195 mm

Rubber retaining strap, 195 mm

€0.99*

#FA21739

Low beam to switch symbol Low beam to switch symbol

Color green

€1.99*

Gleitlager wartungsarm CSB20 aus Metall-Polymer Verbundstoff mit Schmiertaschen

#127894

FAIE Low-maintenance plain bearing CSB20 made of metal-polymer composite with lubrication pockets Low-maintenance plain bearing CSB20 made of metal-polymer composite with lubrication pockets

Bore (mm): 40 Width (mm): 30

Metal-polymer plain bearing CSB20 to ISO 3547 (DIN 1494) with embossed lubrication pockets in a low-maintenance design. The plain bearing bushes are equipped with a low-maintenance sliding material for use in mixed friction applications with grease or oil lubrication. This means that the plain bearings must be lubricated with grease or oil. A hole is provided on the plain bearing for this purpose. The embossed lubrication pockets can optimally absorb the lubricant (grease, oil).The plain bearing bushes are characterised by high wear resistance, low friction and good damping properties. The bushings are also insensitive to shocks. The low friction coefficients, good wear resistance and reliable load capacity of the bearing ensure suitable use in rotating and oscillating movements.The range of applications for plain bearing bushes extends to agricultural equipment, construction machinery, industrial trucks, lifting equipment, hydraulic cylinders and motors as well as steering knuckle bearings, steering gears, power steering and pedal bearings.

€3.99*

Variants from €2.50*

Messerführungsarm Untermesser, komplett mit Schrauben zu Doppelmesser bidux-System, anstelle ESM 267.1360

#FA10944

ESM Lower blade guide arm, complete with screws for Busatis system bidux, instead of ESM 267.1360 Lower blade guide arm, complete with screws for Busatis system bidux, instead of ESM 267.1360

The knife guide arm for the lower knife is supplied complete with the holder and screws. The knife holder fits all double knife bars with the Busatis bidux system.

€169.00*

Kühlschlauch unten Steyr T190, T288, T290,

#FA104632

Lower cooling hose Steyr T190, T288, T290, Lower cooling hose Steyr T190, T288, T290,

Ausführung: unten

€19.90*

Untermesserkopf anstelle Vogel&Noot FR0.217.00, zu Jet Mäher mit bidux Mähwerk

#FA39035

ESM Lower cutterhead instead of Vogel&Noot FR0.217.00, for Jet mower with bidux mower deck Lower cutterhead instead of Vogel&Noot FR0.217.00, for Jet mower with bidux mower deck

Lower cutter head suitable for Vogel & Not Jet mowers with bidux double-blade mower deck. The cutter head is screwed onto the mower blade. Supplied complete with the fitting screws.

€107.00*

#FA116308

Lower left door hinge John Deere Lower left door hinge John Deere

Ausführung: links unten

€54.90*

#107891

Lower link bolt Lower link bolt

D (mm): 22 D1 (mm): 28 L1 (mm): 90 L2 (mm): 90

€6.50*

Variants from €5.60*

Unterlenker-Fanghaken Kat. 2 Original Walterscheid

#FA38051

Lower link catch hook cat. 2 original Walterscheid Lower link catch hook cat. 2 original Walterscheid

Up to 74 kW, price per piece.

€198.50*

#FA59030

Lower link catch hook cat. 3L, original Walterscheid Lower link catch hook cat. 3L, original Walterscheid

Up to 92 kW, price per piece.

€255.00*

Unterlenker-Fanghaken CBM, Kat. 1 bis max. 44 kW / 60 PS

#FA99900

CBM Lower link catch hook CBM, Cat. 1 up to max. 44 kW / 60 HP Lower link catch hook CBM, Cat. 1 up to max. 44 kW / 60 HP

OEM quality, secure locking, easy unlocking, L: 80mm

€119.50*

#FA35818

CBM Lower link catch hook CBM, Cat. 2S up to max. 66 kW / 90 HP Lower link catch hook CBM, Cat. 2S up to max. 66 kW / 90 HP

OEM quality, secure locking, easy unlocking, L:85mm

€129.50*

#FA122908

Lower link catch hook CBM, Cat. 3S up to max. 132 kW / 180 HP Lower link catch hook CBM, Cat. 3S up to max. 132 kW / 180 HP

OEM quality, secure locking, easy unlocking, L: 110mm

€168.90*

#FA20293

Lower link catch hook set Cat.2 LS-M2 Lower link catch hook set Cat.2 LS-M2

For tractors up to 73.5 kW (100 HP). The pawl is operated from above, so no annoying levers. The lower link catch hooks are equipped with a new safety lock. The quick couplers have a lockable opening position. Scope of delivery: 2 lower link catch hooks, 2 catch bushes, 2 catch balls with spacer ring, spacer spring and actuation chain.

€315.00*

Unterlenkerfanghakensatz Original Walterscheid Kat. 2 bis 74 kW/100 PS

#FA35504

Lower link catch hook set Original Walterscheid Cat. 2 up to 74 kW/100 HP Lower link catch hook set Original Walterscheid Cat. 2 up to 74 kW/100 HP

Scope of delivery: 2 lower link catch hooks, 2 ball catch profiles, 2 catch balls, 1 operating cable, installation and operating instructions. The lower link catch hooks made of high-strength forged steel are equipped with a locked open position. The lock can only be released using the opening lever. Automatic unlocking is impossible.

€499.00*

#FA9965

Lower link catch hook, Cat.2 LS-M2 Lower link catch hook, Cat.2 LS-M2

up to 73.5 kW/100HP, L:110mmloose, per piece

€119.50*

#FA107212

Lower radiator hose for Steyr 8000 Series Lower radiator hose for Steyr 8000 Series

Inner diameter: 44 mm

€39.95*

Seite 91 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery