Agricultural machinery

Hydraulic hand pumps are used in hydraulic systems where only one hydraulic movement is required. These are mostly simple systems where high pressure with low delivery capacity is required, such as bending tools, lifting devices, tipping devices for car trailers and smaller agricultural trailers, etc. Hand pumps are a simple and inexpensive solution for operating single-acting hydraulic cylinders. The hydraulic cylinder is retracted by opening the drain cock and using the weight of the load.The hand lever is included.Connection thread: 3/8" BSP internal thread

For universal use in agriculture and industry. The simple and inexpensive solution for operating hydraulic cylinders.

For universal use in agriculture and industry. The simple and inexpensive solution for operating hydraulic cylinders.

Single-acting with return spring, swiveling, lifting force at 150 bar: 4.9 tons. max. 250bar, temperature range: -25C to +80C, dimensions A: 65mm, B: 70mm, C: 80mm, E: 400mm, P 1/2" (BSP), M: 54mm, N: 230mm, G: 8mm, stroke 190mm

Single-acting with return spring, swiveling, lifting force at 150 bar: 8.5 tons. max. 250 bar, temperature range: -25C to +80C, dimensions A: 85mm, B: 90mm, C: 100mm, E: 430mm, P 1/2" (BSP), M: 54mm, N : 230mm, G: 8mm, stroke 230mm

Single-acting with return spring R1/2?, swiveling.Lifting force 100 bar: 5.67 t, 150 bar: 8.5 t.

With side connections R 3/8?, shaft 16 mm, max. inlet pressure 140 bar.

Connections R 1/2?, shaft 25 mm, plain bearing.

Connections R 1/2?, shaft 32 mm, plain bearing.

With side connections R 1/2?, shaft 25 mm, with tapered roller bearings.

Suitable for Case: from 01/99 CS64/64A, CS68/68A, SC75/75A, CS78/78A, CS86/86A, CS94/94ASuitable for Steyr: 540, 545, 548, 650, 658, 760, 768, 870, 1090, 1100, 1108, 8060, 8070, 8080, 8090, 8045, 8055, 8065, 8075, 8095, 8100, 811 0, 8120, 8130, 8140, 8150, 8160, 8165, 8170, 942, 948, 955, 964, 970, 975, M968, M975, 9078, 9083, 9086, 9094, M9078, M9086, M9094

Suitable for Case JXU from 01/2002: 70, 80, 90, 100, New Holland L: 65, 75, 85, 95, TL from 01/1998: 70, 80, 90, 100, Ford New Holland: 4835, 5635 , 6635, 7635Can be used instead of Case-IH, Ford, New Holland: 1931162, 84399618,1930986, 47134379, 84592273

Suitable for Deutz: D4507C, 4807C, 6007C, 6207C, 6507C, 6807C, 6907C, 7007C, 7207C, 7807C, DX80, 85, 86, 90, 92, DX110 from 01/84, DX120 from 01 /84, DX140 from 01/84, DX 160 from 01/84, DX230 from 01/84, DX3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, DX4.10, 4.17A, 4.30, 4.31, 4.50 , 4.51, 4.56, 4.57A, 4.61, 4.70, 4.71, 6.05, 6.06, 6.10, 6.16, 6.30, 6.50, 7.10, 8.30, Agrostar/Agrostar DX 4.61, 4.68, 4.71, 4.78, 6.0 8, 6.11, 6.21, 6.28, 6.31, 6.38, 6.61, 6.71, 6.81, 6.88, 8.31, Agroxtra DX 3.57, 4.07, 4.17, 4.57, 6.07

Suitable for Steyr: Hydraulic steering 1200, 8080 from VG.No. 8947, 942, 948, 955, 964, 968, M968, 970, 975, M975, 9078, M9078, 9083, 9086, M9086, 9094, M9094

Suitable for Fendt: Farmer 102, 103, 104, 105, 106, 108, Farmer 200S/SA, 201, 303LS, 304LS, 305S/LS/LSA, 306S/LS/LSA, 307S/LS /LSA, 308S/LS/LSA, 309S/LS/LSA, 310LS/LSA, 311LSA, 312LSA, F250GT, F255GT, F275GT/GTF, F345GT/GTM, F360GT/GTF/GTH, F365GTA, F380GT/GTA/GTF, F390GTA , F395GTA/GHA

Suitable for Steyr: Hydro steering 8060 from 01/80, 8070, 8075, 8100, 8120, 8140, 8150, 8160, 8170

Suitable for Deutz: D2506, 3006, 4006, 4506, 5006, 5206, 5506, 6006, 6206, 6806, 7006, 7206, 8006, 9006, 10006, 13006, 16006, D4007, 4507, 4807 , 5707, 6007, 6207, 6507, 6807, 6907, 7007, 7207, 7807, D4507C, 4807C, 5207C, DX 3.50, 3.60, 3.70, Intrac 2002, 2003, 2004, 2006, 6.05, 6.30, 6.60

Suitable for Fiat, New Holland: 45-66, 45-66S, 50-66, 55-66, 55-76F, 55-86F, 55-90, 60-66, 60-76, 60-85, 60-90, 60-93, 60-94, 62-86F, 65-66, 65-90, 65-93, 65-94, 90-90, 95-55, 1180, 1280, 1380, 1580, 1880, 100-90, 110-90, 115-90, 130-90, 140-90, 160-90, 180-90, Winner F100, F120, F130

Hydraulic oil based on high-qualityselective raffinates with active ingredients to improveoxidation resistance and corrosion protection.DIN 51 524/Part 2.

Hydraulic oil based on high-qualityselective raffinates with active ingredients to improveoxidation resistance and corrosion protection.DIN 51 524/Part 2.

In glycerin bath with 1/2? radial connection.

In glycerin bath with 1/4? radial connection.

With front ring for installation in the dashboard or in a control panel. The connection with external thread is located on the back of the pressure gauge. The specification of the diameter 100mm refers to the outer housing diameter of the pressure gauge for the cutout in the dashboard or dashboard.

With front ring for installation in the dashboard or in a control panel. The connection with external thread R 1/4 inch is located on the back of the pressure gauge. The diameter 63mm refers to the outer housing diameter of the pressure gauge for the cutout in the dashboard or dashboard.