Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA28455

Hammer flail suitable for HMF, Agricom Hammer flail suitable for HMF, Agricom

€25.49*

Hammerschlegel passend zu Kuhn, Fehrenbach, Nobili, Willibald, Kirchner

#FA7995

Hammer flail suitable for Kuhn, Fehrenbach, Nobili, Willibald, Kirchner Hammer flail suitable for Kuhn, Fehrenbach, Nobili, Willibald, Kirchner

€21.90*

Hammerschlegel passend zu Seppi, Breviglieri, Bomford, Howard, Mc Connel, Rinieri, Sicma

#FA2532

Hammer flail suitable for Seppi, Breviglieri, Bomford, Howard, Mc Connel, Rinieri, Sicma Hammer flail suitable for Seppi, Breviglieri, Bomford, Howard, Mc Connel, Rinieri, Sicma

€19.90*

Hammerschlegel passend zu Seppi, Breviglieri, Howard, Mc Connel

#FA28457

Hammer flail suitable for Seppi, Breviglieri, Howard, Mc Connel Hammer flail suitable for Seppi, Breviglieri, Howard, Mc Connel

€15.59*

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

#FA2523

Hammer mallet suitable for Hammer mallet suitable for

Chabas, Fischer, HMF, Frei, Palladino, Pegoraro, Rotoram, Votex.

€23.79*

#FA46158

linseal Hand pump for 25 liter canister Hand pump for 25 liter canister

The hand pump allows you to fill a tire even against the air pressure. However, the back pressure should not be higher than 2.0 bar. With high-pressure tires, the air must be released up to this limit.

€79.90*

Handpumpe für Tankaufbau, doppelwirkend, Doppelhub

#401

Hand pump for tank construction, double-acting, double stroke Hand pump for tank construction, double-acting, double stroke

Delivery volume (cm³/rev): 12 Pression max (bar): 380

With 4-way valve and check valve in A+B, including seal and fastening screws.

€269.00*

#400

Hand pump for tank construction, double-acting, double stroke Hand pump for tank construction, double-acting, double stroke

Delivery volume (cm³/rev): 45 Pression max (bar): 280

With 4-way valve and drain cock, including seal and fastening screws.

€259.00*

Variants from €249.00*

#408

Hand pump tank Hand pump tank

Contents (L): 5,0

€119.00*

Variants from €71.90*

#FA98478

Hand pump to feed pump Hand pump to feed pump

Thread M16x1.5

€19.95*

Handpumpen für Tankaufbau, einfachwirkend, Doppelhub

#396

Hand pumps for tank construction, single-acting, double stroke Hand pumps for tank construction, single-acting, double stroke

Delivery volume (cm³/rev): 25 Pression max (bar): 350

Includes gasket and mounting screws.

€209.00*

#FA125814

Handbrake knob Steyr T80 Handbrake knob Steyr T80

Surface: blank

€12.90*

#24357

Handbrake lever Handbrake lever

Length (mm): 630

With push button and plastic handle.

€76.20*

Variants from €71.90*

#FA24358

Handbrake lever 500 mm Handbrake lever 500 mm

With toothed segment, sheet metal handle and angle bracket, robust design.

€89.90*

#FA118756

Handbrake lever complete for Steyr T80 Handbrake lever complete for Steyr T80

Complete with small parts, suitable for Steyr T80

€210.00*

#FA24966

Handbrake notch Handbrake notch

Suitable for Steyr

€11.90*

#FA24972

Handbrake segment Handbrake segment

Suitable for Steyr

€34.50*

#FA115491

Handbrake segment for Steyr Plus series Handbrake segment for Steyr Plus series

Handbrake segment for Steyr Plus 50, 650 up to vehicle number: 6548

€95.00*

#FA106106

Handbrake shoe for Steyr and Lindner Handbrake shoe for Steyr and Lindner

Length (L): 210mmWidth (W): 30mmHeight (H): 110mm

€59.90*

#FA125815

Handbrake tooth Steyr T80, T84, T86 Handbrake tooth Steyr T80, T84, T86

For welding into the handbrake rod Faie.Nr: 24919

€11.95*

#1195

Handle cranked Handle cranked

H (mm): 65 K (mm): 165 Square (mm): 12

Offset handle made of die-cast zinc in natural color. Eg, for ball valves or changeover valves with a square shaft extension.

€9.99*

Variants from €5.19*

#14027

Handle for chopping shares Handle for chopping shares

Length (mm): 355 Version: RS 1087C-30°

Hole spacing 16 mm

€25.50*

Variants from €23.00*

Seite 65 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery