Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#7755

ESM End blade for Busati's double knife mower End blade for Busati's double knife mower

Version: right can be used instead of Busatis-ESM: GB2632, 344.4001, 5802.005.01

Original ESM end blade for Busatis double knife mowers. Made in Germany. Original ESM Carbodux blade.

Variants from €5.75*

€5.75*

#771

End cap with ball, galvanized End cap with ball, galvanized

D (mm): 158 Nominal size: HK133

3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm

Variants from €54.00*

€77.00*

#768

End cap with cup and sealing ring, galvanized End cap with cup and sealing ring, galvanized

B (mm): 180 Nominal size: HK159

Variants from €19.90*

€37.00*

#716

End coupling with cup and sealing ring, galvanized End coupling with cup and sealing ring, galvanized

B (mm): 130 Nominal size: DN100

4 inch = DN100, cup width B = 130 mm5 inch = DN120, cup width B = 150 mm6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm

Variants from €17.99*

€17.99*

#FA29078

Engine gasket set below for Steyr Engine gasket set below for Steyr

Use: Engine gasket set below

€29.50*

#FA29079

Engine gasket set below for Steyr Engine gasket set below for Steyr

Use: Engine gasket set below

€34.95*

#FA107620

Engine gasket set MF bottom AD3.152 Engine gasket set MF bottom AD3.152

Version with cord seal3 cylinder engine

€20.95*

#FA119381

Engine gasket set Steyr WD407.40 Engine gasket set Steyr WD407.40

Engine gasket set (exhaust replacement) without cylinder head gasket ~

€155.00*

#FA116268

Engine oil filter John Deere 6000 series Engine oil filter John Deere 6000 series

Ausführung: Original John Deere

€16.95*

#28738

Engine oil GTA SAE 10W/40 Engine oil GTA SAE 10W/40

Contents: 60 L

Partially synthetic low-friction oil for car engines.Good cold start properties. ACEA A3/B4, API SL/CF, MB 229.1VW 500.00 / 505.00.

Content: 60 l (€5.82 / 1 l)

Variants from €8.99*

€349.00*

#FA55255

Engine oil pressure switch for Steyr M10x1 Engine oil pressure switch for Steyr M10x1

M10x1, for Steyr Plus series ~

€8.99*

#FA25326

Engine oil pressure switch M10x1 Engine oil pressure switch M10x1

Thread: M10x1

€19.95*

#FA108338

Engine oil pressure switch MF Engine oil pressure switch MF

Thread: 1/8"~ E.G

€8.20*

#28742

SAUGUT Engine oil Turbo S SAE 15W/40 Engine oil Turbo S SAE 15W/40

Motor oil for diesel and gasoline engines. For commercial vehicles,highly loaded work machines and cars.ACEA A3/B3, B4 E2 API SL/CG-4, MB 228.1 / 229.1,VW 505.00 / 501.01, MAN 271, Volvo VDS

Content: 208 l (€3.84 / 1 l)

Variants from €5.99*

€799.00*

#28733

Engine oil WIV DPF SAE 5W/30 Engine oil WIV DPF SAE 5W/30

Contents: 60 L

Synthetic motor oil specifically for vehicles from theAudi, Seat, Skoda, VW brands.VW 504.00 / 507.00, ACEA A3/B4, C3MB 229.51 (covers 229.31), BMW longlife-04, ~ Porsche C30, GM Dexos 2

Content: 60 l (€9.97 / 1 l)

Variants from €15.90*

€598.00*

#114138

Engine preheater heating element 600 watts Engine preheater heating element 600 watts

Hose connection: 36-38 mm mm Length (mm): 124

Perfect for installation in the radiator hosePower: 600 watts Attention delivery without connection cable set - must be ordered separately

Variants from €235.00*

€235.00*

#FA111365

Engine repair kit for Steyr engine WD411 Engine repair kit for Steyr engine WD411

Repair kit consisting of:Pistons, bushings, piston rings, bushing rings, connecting rod bearings standard size and cylinder head gasket set

€885.00*

#FA128073

Engine repair kit MF135, MF240 Engine repair kit MF135, MF240

Engine overhaul kit scope of delivery: pistons, piston rings, bushes, cylinder head gasket set and engine gasket set

€325.00*

#FA119392

Engine repair kit to Steyr WD408 Engine repair kit to Steyr WD408

Complete set consisting of: ~Piston liner set, liner rings, cylinder head gasket set and connecting rod bearing set standard size ~Suitable for Steyr engine WD408

€965.00*

#FA107624

Engine seal set below MF with shaft seal Engine seal set below MF with shaft seal

Version with shaft seal

€26.50*

#FA115417

Entlüftungsschraube zu Steyr T80 Entlüftungsschraube zu Steyr T80

Entlüftungsschraube zu Steyr: T80, T84, T86, T180 teilweisePos.Nr 7

€35.95*

ESM mowing blade for the SC universal bar with folding mechanism on the blade holders. 2 threaded holes M8 with hole spacing 101.6 mm and bore � 8.1 mm, without reinforcement strip

#FA97680

ESM ESM mowing blade for the SC universal bar with folding mechanism on the blade holders. 2 threaded holes M8 with hole spacing 101.6 mm and bore � 8.1 mm, without reinforcement strip ESM mowing blade for the SC universal bar with folding mechanism on the blade holders. 2 threaded holes M8 with hole spacing 101.6 mm and bore � 8.1 mm, without reinforcement strip

Mower blade, 23 blades

€219.00*

#FA2680

Espagnolette wood N73A suitable for mortar Espagnolette wood N73A suitable for mortar

€49.00*

#FA10823

Espagnolette wood N73D suitable for mortar Espagnolette wood N73D suitable for mortar

Driving rod wood suitable for Mrtl cutter bars. The crank rod wood is made from local ash wood.

€49.00*

Seite 45 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery