Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

Variants from €15.90*

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Messerkopf Steyr 180A7256 mit 8mm Bohrungen

#FA41824

Schröckenfux Cutter head Steyr 180A7256 with 8mm holes Cutter head Steyr 180A7256 with 8mm holes

€79.00*

#FA7595

FAIE Cutter head Steyr Phantom instead of 192720212 Cutter head Steyr Phantom instead of 192720212

Cutter head for Steyr Phantom cutter bars of the Jubilee series, Plus series and 8000 series.

€95.00*

Messerkopf passend zu Aebi, BCS und Reform mit gezahnter Messeraufnahme

#FA123578

Cutter head suitable for Aebi, BCS and Reform with serrated knife holder Cutter head suitable for Aebi, BCS and Reform with serrated knife holder

Knife head loosely suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

€57.00*

Messerkopf mit Führungszylinder LA=102 mm

#FA53151

Cutter head with guide cylinder LA=102 mm Cutter head with guide cylinder LA=102 mm

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

€189.00*

Messerkopf mit Führungszylinder, LA=152 mm

#FA53138

Cutter head with guide cylinder, LA=152 mm Cutter head with guide cylinder, LA=152 mm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€165.00*

#5619

cutting ring cutting ring

Series / pipe Ø: 12S

Variants from €0.37*

€0.52*

#FA44746

Cutting ring heavy series Cutting ring heavy series

€0.90*

#FA31132

Cylinder head gasket for Steyr Cylinder head gasket for Steyr

for engine WD 306 A, WD 307, WD 307.40,

€95.00*

#FA97972

Cylinder head gasket for Steyr Cylinder head gasket for Steyr

Suitable for Steyr engine WD210

€52.95*

Zylinderkopfdichtung zu Steyr Motr WD411 mit Bohrung ø 100mm

#FA104560

Cylinder head gasket for Steyr Motr WD411 with bore � 100mm Cylinder head gasket for Steyr Motr WD411 with bore � 100mm

for cylinder liner with 100mm bore

€59.95*

Zylinderkopfdichtsatz zu Steyr 3 Zylinder Motor WD308 mit Bohrung ø 100mm

#FA104558

Cylinder head gasket set for Steyr 3 cylinder engine WD308 with bore � 100mm Cylinder head gasket set for Steyr 3 cylinder engine WD308 with bore � 100mm

for cylinder liner with 100mm bore,

€69.90*

Zylinderkopfdichtsatz Ford 10, 1000, 600, 700 Serie

#FA124069

Cylinder head gasket set Ford 10, 1000, 600, 700 series Cylinder head gasket set Ford 10, 1000, 600, 700 series

Passend zu Ford Serie 10

€57.00*

#FA124068

Cylinder head gasket set Ford 10, 600 series Cylinder head gasket set Ford 10, 600 series

Passend zu Ford Serie 10 mit 3 Zylinder Motor

€52.50*

#FA124070

Cylinder head gasket set Ford/MF Cylinder head gasket set Ford/MF

Zylinderkopfdichtsatz Ford Dexta & Ferguson TE20 (Motor P3)

€55.00*

#FA107619

Cylinder head gasket set MF A3.144, A3.152 Cylinder head gasket set MF A3.144, A3.152

For Perkins engine type A3.144, A3.152Design: copper

€44.95*

#FA107622

Cylinder head gasket set MF AD3.152 copper Cylinder head gasket set MF AD3.152 copper

Version: copper

€42.95*

Zylinderkopfdichtsatz Perkins A4.212, A4.236, A4.248

#FA98607

Cylinder head gasket set Perkins A4.212, A4.236, A4.248 Cylinder head gasket set Perkins A4.212, A4.236, A4.248

Cylinder head gasket set complete for Perkins

€59.00*

Zylinderkopfniete 5x16,5mm zu Agria 075690

#FA53015

Cylinder head rivet 5x16.5mm for Agria 075690 Cylinder head rivet 5x16.5mm for Agria 075690

€0.95*

#20030

cylinder head screw cylinder head screw

Piece: 1

M16x50mm, 10.9 to flange towing eye

€1.95*

#FA24826

Cylinder lock Cylinder lock

Suitable for Case and Steyr

€69.00*

#FA24809

Cylinder lock Cylinder lock

Suitable for Case, Steyr and New Holland

€44.90*

#FA24811

Cylinder lock spring Cylinder lock spring

Suitable for order number: 24811

€2.99*

#FA1456

d) Eye M8, 10x16 d) Eye M8, 10x16

A=16, B=8.1, C=10mm

€2.80*

#FA25316

Dashboard indicator switch, 7 connectors Dashboard indicator switch, 7 connectors

Version: with screw connectionsThread diameter: 26mm

€29.95*

Seite 37 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery