Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#3865

Car trailer hitch for unbraked trailers Car trailer hitch for unbraked trailers

Connection: rund Ø 70 mm Stützlast (kg): 75 Total permissible weight (kg): 750

up to 750kg permissible total weight, with safety display, hole spacing for drawbar attachment 90mm, holes 12.5mm

Variants from €24.50*

€24.50*

#FA128425

Carbon set BSX124, 9x13x25.5 mm Carbon set BSX124, 9x13x25.5 mm

Carbon set of 4 pieces Width: 13 mmLength: 25.5 mmThickness: 9 mm

€9.95*

#3842

Cardan shaft protection half SD05 inside Cardan shaft protection half SD05 inside

Length (mm): 1000

For Walterscheid cardan shafts with groove extension 47 mm, including slide ring and retaining chain

Variants from €66.00*

€69.90*

#3843

Cardan shaft protection half SD05 outside Cardan shaft protection half SD05 outside

Length (mm): 1000

For Walterscheid cardan shafts, groove extension 47 mm, including slide ring and retaining chain

Variants from €69.00*

€74.90*

#6559

Cardan shaft protection half SD15 inside Cardan shaft protection half SD15 inside

Length (mm): 1000

For Walterscheid cardan shafts, groove extension 58 mm, including slide ring and retaining chain

Variants from €84.90*

€89.80*

#6561

Cardan shaft protection half SD15 outside Cardan shaft protection half SD15 outside

Length (mm): 550

For Walterscheid cardan shafts, groove extension 47 mm, including slide ring and retaining chain

Variants from €91.00*

€91.00*

#6564

Cardan shaft protection half SD25 inside Cardan shaft protection half SD25 inside

Length (mm): 550

For Walterscheid cardan shafts, groove extension 70 mm, including slide ring and retaining chain

Variants from €98.50*

€98.50*

#6568

Cardan shaft protection half SD25 outside Cardan shaft protection half SD25 outside

Length (mm): 550

For Walterscheid cardan shafts, groove extension 70 mm, including slide ring and retaining chain

Variants from €107.50*

€107.50*

#FA12585

ESM Carrier pin for Agria instead of 065311, 373.0050 Carrier pin for Agria instead of 065311, 373.0050

Carrier pin suitable for Agria for attaching the cutter bar to the power tool.

€175.00*

#FA27455

Carrying pin Carrying pin

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€265.00*

-13 %

#FA100243

SAUGUT Cat.1 field rail triangle, anti-twist Cat.1 field rail triangle, anti-twist

With trailer ball pin 50mm and trailer towing hitch, anti-twist, A: 22mm, B: 661mm, C: 19mm, D: 775 mm (no StvO approval)With the Cat 1 field rail triangle you can attach attachments to your tractor /Attach tractor. The triangle has both a trailer ball pin K50 and a trailer towing hitch.The field rail triangle is twist-proof and thus prevents accidents. It is attached to both the lower links and the upper links. Lower link bolts: 22mm, upper link bolts: 19mmThe field rail triangle is delivered including bolts and linchpins.TOP price-performance ratio

€69.95* €79.95* (12.51% saved)

#43000

Catch ball Catch ball

Cat.: Sondermaß Ø inside (mm): 25 Ø outside (mm): 56

hardened

Variants from €4.80*

€9.99*

#21888

Catch ball HRC58 Catch ball HRC58

Version: Kat. 3-2

Extra hardened, very wear-resistant, hardness HRC58, black burnished.

Variants from €6.99*

€9.50*

-14 %

#FA39621

SAUGUT Catch ball set cat. 2 for lower link (hardened) Catch ball set cat. 2 for lower link (hardened)

Consisting of: ~2 pieces of lower link balls with catch profile, inner 28.5 mm, outer 56 mm2 pieces of lower link balls, inner 28.5 mm, outer 56 mm1 piece top link ball, inner 25.4 mm, outer 50 mm

€29.90* €34.95* (14.45% saved)

#FA131217

SAUGUT Catch ball set Cat. 3 for lower links, hardened Catch ball set Cat. 3 for lower links, hardened

Consisting of: 2 lower link balls with catch profile, inner diameter 38 mm, outer diameter 64 mm2 lower link balls, inner diameter 38 mm, outer diameter 64 mm1 upper link ball, inner diameter 32.5 mm, outer diameter 60 mm

€49.90*

#FA131235

SAUGUT Catch ball set Cat. 3/2 for lower links, hardened Catch ball set Cat. 3/2 for lower links, hardened

Consisting of: 2 lower link balls with catch profile, inner diameter 28 mm, outer diameter 64 mm2 lower link balls, inner diameter 28 mm, outer diameter 64 mm1 upper link ball, inner diameter 25.4 mm, outer diameter 60 mm

€49.90*

#16080

Catch ball Walterscheid Catch ball Walterscheid

Cat.: 2/3 D (mm): 64

Variants from €16.80*

€19.85*

#35847

Catch box without ball Catch box without ball

Cat.: 2 Ø: 28,5

with pin and safety chain

€9.95*

#27919

catch can catch can

Cat.: 3/2 Ø inside (mm): 28,8 Ø outside (mm): 64

With cotter pins and safety chain, hardened.

Variants from €9.99*

€14.95*

#21883

Catch canister HRC58 Catch canister HRC58

Version: Kat. 2

Extra hardened, very wear-resistant, hardness HRC58, black burnished.

Variants from €13.80*

€13.80*

#FA97996

Center axle bolt for Steyr Center axle bolt for Steyr

d: 30 mmLength: 338 mm

€109.00*

#FA108055

Center axle bolt MF35/135 Center axle bolt MF35/135

Suitable for curved axleOuter diameter: 44.3mmLength: 121mm

€32.50*

#FA99377

Center axle bolt Steyr Plus Center axle bolt Steyr Plus

Outer diameter: 40 mmLength: 370 mm

€55.00*

#FA108058

Center axle bushing MF135/240 Center axle bushing MF135/240

Suitable for straight axleDimensions: 42.44 x 48.1 x 31.95mm

€6.99*

Seite 21 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery