Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA63936

Bulb 12V/21W BA15s Bulb 12V/21W BA15s

for brake and indicator lights, pack of 10

€4.65*

#FA63937

Bulb 12V/5W BA15s Bulb 12V/5W BA15s

10 piece pack

€4.45*

#FA33066

Schröckenfux Busatis bottom knife 170cm 23 blades, 4 mushroom blades, 1 end blade Busatis bottom knife 170cm 23 blades, 4 mushroom blades, 1 end blade

Lower knife for Busatis double knife bar with a total number of blades of 23 pieces. Of these, 4 are blades with a mushroom for holding the knife guide arms and 1 is an end blade. The pitch of the blades is 76mm from blade center to blade center. The knife is delivered complete with the riveted bottom cutter head. Suitable for Busatis rear and side mower BM 1102.DME 1822 B, 18 blades GB 2730, 4 mushroom blades, 1 end blade GB2632, cutter head GB 2742, 5470.055.51 = 265.5960

€285.00*

#FA112653

ESM Busatis clearing disc complete with bearings Busatis clearing disc complete with bearings

Clearance disc complete with bearing suitable for all Busatis front mowers. The hole for the mount has a diameter of 25mm. There are 2 bearings 6005 RS installed.

€185.00*

#FA41380

Schröckenfux Busatis rear mower BM 1102 KW bottom knife 5�, 21 blades Busatis rear mower BM 1102 KW bottom knife 5�, 21 blades

DME 1506 B, 17 blades GB 2730, 3 mushroom blades, 1 end blade GB 2632, 1 bedknife head GB 2742, 5470.055.41 = 265.0070

€272.00*

#FA33065

Schröckenfux Busatis rear mower BM 1102 KW upper knife 170 cm, 22 blades Busatis rear mower BM 1102 KW upper knife 170 cm, 22 blades

DME 1822 A, 18 blades GB 2730.4 mushroom blades, knife head GB 2741, 5460.055.51 = 262.5960

€272.00*

#FA41379

Schröckenfux Busatis rear mower BM 1102 KW upper knife 5�, 20 blades Busatis rear mower BM 1102 KW upper knife 5�, 20 blades

DME 1506 A, 16 blades GB 2730, 4 mushroom blades, 1 upper cutter head GB 2741, 5460.055.43 = 262.5940

€247.00*

#FA108051

Bush center suspension front axle MF 35/135 Bush center suspension front axle MF 35/135

Design: curved axleDimensions: 48.6 x 44.7 x 38.4mm

€12.90*

#FA5054

Bushing 40.881.100, 20x28x39 mm Bushing 40.881.100, 20x28x39 mm

€1.59*

#FA97998

Bushing center axle bolt Steyr Bushing center axle bolt Steyr

Dimensions: 30 x 35 x 452 pieces per vehicle

€39.95*

#FA18589

Bushing centric Bushing centric

€3.29*

#FA18588

Bushing eccentric Bushing eccentric

€3.69*

#FA99378

Bushing for center axle bolts Bushing for center axle bolts

Suitable for order number: 99377Inner diameter: 40mm Outer diameter: 45mmHeight: 55mm

€14.95*

#FA103078

Bushing for steering column arm shaft Bushing for steering column arm shaft

Dimensions: 28x31x35For Steyr T188 up to vehicle no. 9655

€39.95*

#FA98278

Bushing reform handlebar band rake Bushing reform handlebar band rake

Suitable for Reform band rakes in the original Reform version

€1.45*

#FA104559

Bushing rings for Steyr engine WD307, 308, 407, 408, Bushing rings for Steyr engine WD307, 308, 407, 408,

Suitable for Steyr engine type WD307, WD308, WD407, WD408O-ring for cylinder liner 2 pieces are required per liner

€4.95*

#FA1455

AL-KO c) Eye M8, 5x28 c) Eye M8, 5x28

for gas spring

€2.99*

#FA124043

Cab bearing Steyr 8000, 8100, 900 series Cab bearing Steyr 8000, 8100, 900 series

Hole spacing: 65x80mm

€79.00*

#FA116279

Cabin air filter John Deere 6000, 6010, 6020, 6030 series Cabin air filter John Deere 6000, 6010, 6020, 6030 series

Kabinenluftfilter passend zu John Deere

€49.95*

#FA102746

Cabin filter SKL46322 / KPG1051 Cabin filter SKL46322 / KPG1051

Dimensions for inserting the filter:Length: 230mmWidth: 163mmTotal height: 45mm

€22.95*

#FA97954

Cable harness for Steyr T180 Cable harness for Steyr T180

Suitable for Steyr T180

€225.00*

#FA115395

Cable harness specific to Steyr T80 Cable harness specific to Steyr T80

Suitable for Steyr T80

€195.00*

#FA115396

Cable harness specific to Steyr T84 Cable harness specific to Steyr T84

Suitable for Steyr T84

€192.00*

#FA97953

Cable harness Steyr Cable harness Steyr

complete wiring harness

€159.00*

Seite 19 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery