Agricultural machinery

Thread M 50 x 2, outer diameter 57 mm. 28 mm hexagonal.

Gearboxes with slip-on fasteners are an efficient, flexible and maintenance-friendly solution for driving hydraulic pumps. They enable optimum speed adjustment, resulting in improved performance and reliability of hydraulic systems in a wide range of applications. When selecting a suitable gearbox, the specific requirements of the application in terms of torque, speed and size should be taken into account.The connection for the PTO shaft is 1 3/8 x 6 teeth. The input speed can be up to 1000 rpm

Input speed 540 or 1000 rpm.

Transmission gear for hydraulic pumps of assembly 2 or 3 with quick-release fastener. The transmission has a through drive on a PTO shaft stub 1 3/8 x 6. The gear ratio is 1: 3.8. When using a hydraulic pump from assembly 2, a centering ring (Faie No. 112326) must be used. This ring reduces the centering seat of BG 3 from 50.8mm to the diameter of the centering seat of BG 2 of 36.5mm.

Input speed 540 or 1000 rpm.

Input speed 540 or 1000 rpm.

with 2 screw holes, 160x160mm

in white version, WxH:145x165mm ~

For tool-free attachment to a mounting triangle or the cultivator bracket. The device triangle is attached to the spreader with 4 screws.

​Mounting on the front of the radiator grille Total length: 450 mm 

Length: 540 mmNote: Strip must be heated and adjusted to the hood!

3-way nozzle body for quick changing of nozzles of different sizes/spraying characteristics.Stop position between the spraying positions.ChemSaver membrane check valve for drip-free shut-off. Standard diaphragm opens at 0.7 bar. Membranes made of EPDM as standard, optionally made of Viton.Maximum operating pressure 10 bar.1/2"~ and 3/4"~ Versions with a hexagon socket in the top clamp for attachment to flat surfaces and rod profiles.Mounting via a 9.5 mm hole in the pipe.Maximum flow 6.1 l/min at 0.34 bar pressure drop, 8.6 l/ min at 0.69 bar pressure drop.

Unbeatable durability: The tarpaulin is the ideal protective shield against all weather conditions!100% waterproof and extremely tear-resistant PVC fabric with 650 g/m², solid brass eyelets approx. every 50 cm, riveted and plastic-reinforced corners high UV stability - maximum durability, colour green, please note +/- 5% tolerance, size specification includes reinforced edges. PolyTarp® 650 The tarpaulin that can withstand even the most extreme conditions. Whether you need to protect valuable goods, building materials or vehicles. This solid PVC fabric tarpaulin is robust and has been specially developed for extreme conditions. Your advantages at a glance:Perfect protection: The highly UV-stable material prevents your cover from becoming brittle, thus extending the service life of your tarpaulin and the goods underneath.Secure fastening: Thanks to solid, rustproof brass eyelets spaced approximately 50 cm apart and riveted, plastic-reinforced corners, the tarpaulin can be fastened quickly and securely.Versatile: The PolyTarp® 650 is not only suitable for covering materials, but also ideal for trailers and containers.Wide selection: Choose the perfect tarpaulin for your needs from a wide range of sizes.Invest in maximum safety and durability for your goods. With the PolyTarp® 650, you are choosing quality that delivers under the most difficult conditions.

Suitable for Case and Steyr

Application: surface spraying, liquid fertilization110 nominal spray angle, injector technology, flat spray pattern, hybrid of the patented TT Turbo TeeJet and AI injector nozzle.Patented design with large, round free cross sections minimizes the risk of clogging.Thanks to the injector principle Larger drops are generated, and depending on the preparation, air pockets are also possible.Construction made of plastic for very good chemical resistance and high wear resistance.Removable injector insert.Drift reduction excellent, JKI -loss-reducingPressure range 1-7 bar, optimal pressure in terms of effect 3-7 bar.Automatic alignment of the spray jet with Quick TeeJet cap Order No. 66757

​Voltage: 12VConnectors: 8-pin (6x plug, 2x loose)  Tube diameter: 45 mmLength of connection cable: 350 mm 

Farbe grün getönt, bis 31.08.2005

​Are you looking for a completely reliable solution for professional drinking water supply? Our drinking water hose, featuring a tear-resistant polyester fabric lining embedded in an inner and outer layer of high-quality thermoplastic polyurethane (PU), combines extreme durability with uncompromising hygiene. Fitted with robust Storz couplings, this hose is ready for immediate use in demanding, continuous operation.Areas of application:    Drinking water supply    Drinking water transfer hose    Emergency supply hoseAdvantages:    Extremely pressure-resistant: With a maximum operating pressure of 17 bar, this hose effortlessly withstands even severe pressure surges and intense stresses.    Top-quality material: Manufactured from modern polyurethane (PU). This makes the hose not only extremely light and flexible, but also highly abrasion-resistant, UV-resistant and durable.    Easy to clean and disinfect thanks to the very smooth inner surface    100% safe for drinking water: The inner material is completely tasteless, odourless and certified for the transport of clean drinking water (complies with all current KTW and DVGW guidelines).    Quick connection: The factory-fitted Storz couplings guarantee a connection in a matter of seconds – drip-free and absolutely secure – in the blink of an eye.

suitable for stripping tine order no. 54480

suitable for stripping tine order no. 54480

The U-nut with M16x1.5mm thread and hole spacing of 50mm is used to fasten rotary harrow tines. Using the U-nut reduces the time required and simplifies the assembly and disassembly of the rotary harrow tines.

U-profile guide to the locking bolts to the quick-change frame. The U-profile can be welded onto any quick-change frame in order to be able to use the hydraulic locking Faie No. 79158.The guides of the mechanical locking, if these do not correspond, are cut off from the frame and the U-profile is welded on again.

Überwurfmutter für Regelgestänge zu Steyr: T80, T84, T86, T180 teilweisePos.Nr 48