Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA24662

Top door window Top door window

left/right, color tinted, green

€59.95*

#FA24624

Top door window for Steyr RS2 Top door window for Steyr RS2

Lens: Clear, right/left

€85.00*

Gummiunterlage für Zierleiste Steyr Jubiläumsserie

#FA129478

Top hood trim Steyr anniversary series Top hood trim Steyr anniversary series

Zierleiste oben

€89.00*

Obermesser 150 cm 19 Klingen, anstelle von Busatis DME 1504 A, 5460.002.41

#FA41368

Schröckenfux Top knife 150 cm 19 blades, instead of Busatis DME 1504 A, 5460.002.41 Top knife 150 cm 19 blades, instead of Busatis DME 1504 A, 5460.002.41

Top knife for double knife bar Busatis BM 321 KW with a total number of 19 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The positions of the blades with knobs, starting from the cutterhead, are on the 2nd, 7th, 12th and 17th blade. A cutter head plate is riveted under the upper cutter head. The pitch of the blades from blade centre to blade centre is 76 mm. The knife is supplied complete with the upper cutter head, on the left-hand side when viewed in the direction of travel.

€299.00*

Obermesser 160 cm 22 Klingen passend zu Moty Gigant

#FA28137

Schröckenfux Top knife 160cm 22 blades suitable for Moty Gigant Top knife 160cm 22 blades suitable for Moty Gigant

Top knive for double knife bar Busatis with a total number of 22 blades. Of these, 5 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Suitable for Moty Gigant motorised mowers with Busatis double blade mower. Overall length with cutterhead: 166 cm Length of cutter back: 166 cm Cutter head on the left in the direction of travel, offset 25 mm inwardsCutterhead length: 207 mm Total number of blades: 22, of which 5 blades with knobPosition of the blades with knob starting from the cutterhead: 3rd, 7th, 12th, 17th and 20th blade Blade pitch (blade centre to blade centre): 76 mm

€339.00*

Obermesser 175 cm 23 Klingen passend zu Bucher - Reform Kombi M12

#FA49968

Schröckenfux Top knife 175 cm 23 blades suitable for Bucher - Reform Kombi M12 Top knife 175 cm 23 blades suitable for Bucher - Reform Kombi M12

Top knive for double knife bar Busatis with a total number of 23 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Suitable for Bucher and Reform Kombi M12 motorised mowers with Busatis double blade mower. Overall length with cutterhead: 179 cm Length of cutter back: 173 cm Cutter head on the left in the direction of travel, 56 mm projection over the back of the blade Cutterhead length: 232 mm Total number of blades: 23, of which 4 blades with knobPosition of the blades with knob starting from the cutterhead: 2nd, 8th, 15th and 21st blade Blade pitch (blade centre to blade centre): 76 mm

€279.00*

Obermesser 167 cm 23 Klingen passend zu Nussmüller-Rasant

#FA130161

ESM Top knife 175 cm 23 blades suitable for Nussmüller-Rasant Top knife 175 cm 23 blades suitable for Nussmüller-Rasant

Top knive for double knife bar Busatis with a total number of 23 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76,2 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Suitable for Nussmüller-Rasant Junior 90 motorised mowers with Busatis double blade mower.Cutting width: 167 cm Overall length with cutterhead: 176 cm Length of cutter back: 173 cm Cutter head on the left in the direction of travel, 30 mm projection over the back of the blade Cutterhead length: 290 mm Total number of blades: 23, of which 4 blades with knobPosition of the blades with knob starting from the cutterhead: 3rd, 9th, 15th and 21st blade Blade pitch (blade centre to blade centre): 76,2 mm

€295.00*

Obermesser 190 cm 27 Klingen passend Reform Metrac mit bidux-Mähwerk, Portalantrieb

#FA31813

Schröckenfux Top knife 190 cm 27 blades suitable for Reform Metrac with bidux mower, portal drive Top knife 190 cm 27 blades suitable for Reform Metrac with bidux mower, portal drive

Top knive for double knife bar bidux with a total number of 27 blades. Of these, 5 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Upper knife, 27 blades, 5 blades with knobTotal length with knife head: 1967 mmLength of knife back: 1880 mmKnife head 5840.040.01, 345.0550Protrusion of knife head over knife back: 90 mmLength of knife head: 400 mmTang cutter head: 18 mmPosition of the blades with knob starting from the cutter head: 3rd, 9th,15th, 21th and 26th. bladeBlade pitch (blade center to blade center): 70 mm

€299.00*

Mähmesser zu Mähtrac mit Bidux-Mähwerk und Reckschwingenantrieb

#FA27760

Schröckenfux Top knife, 190 cm, 27 blades, compatible with Nussmüller-Rasant with bidux mower unit Top knife, 190 cm, 27 blades, compatible with Nussmüller-Rasant with bidux mower unit

Top knife for the bidux double-blade bar system, with a total of 27 blades. Of these, 5 are blades with knob for mounting the blade guide arms. The spacing between the centres of the blades is 70 mm. The knife is supplied complete with the riveted upper blade head, located on the left-hand side when viewed in the direction of travel.Suitable for the Nussmüller-Rasant with bidux double-blade mower.Total length including blade head: 195 cmLength of blade backs: 189 cmBlade head on the left-hand side when viewed in the direction of travel, offset 68 mm outwards; blade head length: 380 mmTotal number of blades: 27, of which 5 are blades with knob, position of the blades with knob relative to the blade head: 3rd, 9th, 15th, 21th and 25th bladesBlade spacing (centre to centre): 70 mm

€292.00*

Obermesser 196 cm mit 29 Klingen passend zu Köppl bidux Doppelmesserbalken KPE, ohne Messerkopf

#FA133460

ESM Top knife, 196 cm, with 29 blades, compatible with the Köppl bidux double cutter bar KPE, without cutter head Top knife, 196 cm, with 29 blades, compatible with the Köppl bidux double cutter bar KPE, without cutter head

Top knife for the bidux ESM double-blade bar, compatible with Aebi, IBEX and Köppl, with a total of 29 blades. Five of these are blades with knob for attaching the knife guide arms. The spacing between the centres of the blades is 70 mm. The knive is supplied without the blade head, which is screwed onto the left-hand side when viewed in the direction of travel. The upper-knive-head is secured with 3 M8 fixing screws. The blades with knob are positioned at the 3rd, 9th, 15th, 21st and 27th blades.

€398.00*

Obermesser 230 cm 32 Klingen passend zu Nussmüller-Rasant mit bidux-Mähwerk

#FA70329

Schröckenfux Top knife, 230 cm, 32 blades, compatible with Nussmüller-Rasant with bidux mower unit Top knife, 230 cm, 32 blades, compatible with Nussmüller-Rasant with bidux mower unit

Top knife for the bidux double-blade bar system, with a total of 32 blades. Of these, 6 are blades with knob for mounting the blade guide arms. The spacing between the centres of the blades is 70 mm. The knife is supplied complete with the riveted upper blade head, located on the left-hand side when viewed in the direction of travel.Suitable for the Nussmüller-Rasant with bidux double-blade mower.Total length including blade head: 230 cmLength of blade backs: 223 cmBlade head on the left-hand side when viewed in the direction of travel, offset 68 mm outwards; blade head length: 380 mmTotal number of blades: 32, of which 6 are blades with knob, position of the blades with knob relative to the blade head: 3rd, 9th, 15th, 22nd, 26th and 31st bladesBlade spacing (centre to centre): 70 mm

€379.00*

Türscheibe links oben zu Steyr SK 1 Kabine

#FA24638

Top left door window for Steyr SK 1 cabin Top left door window for Steyr SK 1 cabin

Color: Clear

€69.90*

#FA24652

Top left/right door window, clear Top left/right door window, clear

Color: Clear

€69.95*

#27443

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery