Agricultural machinery

The threaded connector with ball (male part - VT) for the Bauer system is supplied complete with locking ring. The surface is galvanised.3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm

The threaded connector with cup (nut part - MT) for the Bauer system is supplied complete with sealing ring. The surface is galvanised.3 inch = HK 76, cup width B = 98 mm3 1/2 inch = HK 89, cup width B = 120 mm4 inch = HK 108, cup width B =  145 mm5 inch = HK 133, cup width B = 160 mm6 inch = HK 159, cup width B = 180 mm8 inch = HK 194, cup width B = 230 mm

For welding on consoles or mounting hooks from different manufacturer systems. Lower link hook Cat.2 adjustable in width from 800 mm to 1150 mm.

Suitable adapters make it possible to rationalise the use of existing machines, implements and tools. With the three-point adapter, tools and implements with EURO mountings that are suitable for front loader attachment can be used on the rear or front hydraulics. Bale forks, manure forks, shovels etc. can therefore be used universally.The tools and implements with Euro attachment can also be used with tractors without front loaders. Pick-up height 110 mmLoad capacity 1000 kgWeight 70 kg

Suitable adapters make it possible to rationalise the use of existing machines, implements and tools. With the three-point adapter, tools and implements with EURO mountings that are suitable for front loader attachment can be used on the rear or front hydraulics. Bale forks, manure forks, shovels etc. can therefore be used universally.The tools and implements with Euro attachment can also be used with tractors without front loaders. Pick-up height 300 mmLoad capacity 1500 kgWeight 70 kg

Cat. II, 825 mm shoulder measurement

Cat. I, 683 mm shoulder measurement

For volume regulation for a consumer in both flow directions.Max. Pressure 350 bar.

For quantity regulation for a consumer in one flow direction. E.g.: Raise front loader - free/lower - throttled.Max. Pressure 350 bar.

Inner diameter (d) 65mmHeight (H) 26mmOuter diameter (D) 102mm

Total length: 244mmOuter diameter: 14.8mmCone: 14.5 - 16mm

Interior version

Version: external insertion

Suitable for curved axle at the frontThread: 11/16" UNFCone: 14.5 - 16mmLength: 110mm

Rear tie rod endThread: 11/16" Cone 17.0 - 19.3mm

Outer diameter 14.8mmTotal length: 224mmCone: 14.5 - 16mm

For standard front loader tines and large bale tines with M22 thread, FAIE order no. 9437, 18614, 17706, 18597. Max. load 400 kg at a distance of 1000 mm from the frame. The tine carrier is suitable for fork carriers with ISO-2 / FEM-2 (oblique guidance of the fork tines) hanging dimensions. The height of the fork carriage is 407mm.

For heavy-duty tines with M28 thread, FAIE No. 15062, 7275, 7277, 18596. Max. load 500 kg at a distance of 1000 mm from the frame. The tine carrier is suitable for fork carriers with ISO-2 / FEM-2 (oblique guidance of the fork tines) hanging dimensions. The height of the fork carriage is 407mm.

Suitable for Krone loading wagons from 1986, Titan series from 1990, presses Round/Vario/Combipack

Top quality harrow tines suitable for Lely and Lemken power harrows.

Tine for Tonutti wheel turner, new, short version. Thickness 7mm

MKW 10.01.121 + MKW 10.01.099.