Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA23965

Stabilizer short version Stabilizer short version

Length 376-471 mm, bore 2x23mm

€34.00*

#FA11821

Stabilizer Steyr 480-650mm Stabilizer Steyr 480-650mm

suitable for Steyr Plus series, length 480-650mm, bore 28.5mm

€54.95*

#FA99388

Stabilizer Steyr 530-660mm Stabilizer Steyr 530-660mm

Suitable for Steyr Plus, Series 80, length 530-660mm, bore 28.5mmCan be used instead of Steyr: 1395740166, 135700740401

€69.90*

Abdeckscheibe Edelstahl für Lenkräder Steyr

#FA118757

Stainless steel cover plate for Steyr steering wheels Stainless steel cover plate for Steyr steering wheels

Suitable for: T80, T84, T180/a, T182.

€29.95*

Großballenzinken Standard, Doppel-T-Profil

#9437

Standard tines Standard tines

Length (mm): 800

Suitable for Baas, Hauer, Schffer, Weidemann, double T profileMade of spring steel 55Si8, partly C45. All tines with tapered nut and quality guarantee.

€29.99*

#101155

Star lock nut, right-hand thread Star lock nut, right-hand thread

Thread: M 30 x 3

€4.35*

Startsicherheitsschalter zu Lindner Geotrac

#FA117975

Start safety switch for Lindner Geotrac Start safety switch for Lindner Geotrac

External thread: M12x1.5Circuit: normally open

€27.95*

#FA25337

Start safety switch M12x1.5 Start safety switch M12x1.5

Thread: M12x1.5

€29.95*

#FA108339

Start safety switch MF Start safety switch MF

Startsperrschalter

€16.95*

#FA108335

Start sticker MF135 Start sticker MF135

Passend zu Massey Ferguson MF135

€8.99*

#FA108336

Start sticker MF35 Start sticker MF35

Passend zu Massey Ferguson 35, 35X

€8.99*

#FA66416

Start switch/ignition lock Start switch/ignition lock

Suitable for Steyr 80,... 55 mm, parking - O - ignition - pre-glow - startincludes 2 pieces. Start keys

€59.95*

Starter 12V 4,2KW IS1159 MS294 Reduktionsgetriebe

#FA120850

Starter 12V 4.2KW IS1159 MS294 reduction gear Starter 12V 4.2KW IS1159 MS294 reduction gear

Voltage: 12 VPower: 4.2 kWNumber of teeth (Z): 10 ~Number of mounting holes: 3 ~Diameter ~hole (d): 10.9 mm ~Angle (W): L40 Bolt circle (LK): 127 mmPinion diameter (R): 39.6 mmFlange diameter (D): 89 mmLength (L) : 325 mm ~Length 2 (L2): 240 mm ~Length (L): max. 308 mm ~Reduction gear starter: Yes

€369.00*

#FA52042

Starter 12V/2.7KW IS0502 Starter 12V/2.7KW IS0502

Number of mounting holes: 2Diameter bore 12.50.mmDiameter flange 82.50.mm Diameter pinion 34.80.mm Power 2.70 kW Bolt circle 105.00 mm Voltage 12.00 V Angle R50 Number of teeth 9

€259.00*

#FA97385

Starter 12V/2.7KW IS0548/MS274 Starter 12V/2.7KW IS0548/MS274

Number of mounting holes: 2 Diameter bore: (d) 13.50 mm Diameter flange (D) 82.50 mm Diameter pinion (R) 34.80 mm Power 2.70. kW bolt circle (LK) 105.00.mm voltage 12.00V angle (W) R35

€269.00*

#FA97386

Starter 12V/3.0KW IS0201/MS58 Starter 12V/3.0KW IS0201/MS58

Number of mounting holes: 2Diameter of bore (d): 13.50 mmDiameter of flange (D) 82.50 mm Diameter of pinion (R) 41.00 mm Power 3.00 kW Hole circle (LK) 105.00 mm Voltage 12.00 V Angle. (W) R35 Number of teeth (Z) 11

€289.00*

#FA102948

Starter 12V/3.0KW IS0671/MS332 Steyr Starter 12V/3.0KW IS0671/MS332 Steyr

Bolt circle (LK): 105mm Angle (W): R35 Number of mounting holes: 2 Number of teeth (Z): 9 Flange diameter: (D) 82.5mm Pinion diameter :(R) 34.8mm Diameter bore:(d) 12.5mm Power: 3kW Length (L): 340mm Length (L2): 270mm Voltage: 12V

€295.00*

#FA123049

Starter for Case IHC 12V /2.8KW Starter for Case IHC 12V /2.8KW

Starter left installation, 12 volts, 2.8KW

€239.00*

#FA126866

Starter Ford Major Starter Ford Major

12 Volt, 2.2 KW Total length: 380 mmFlange length: 282 mm Teeth: 11

€285.00*

#FA121179

Starter Ford/MF re.Installation Starter Ford/MF re.Installation

Einbau in Fahrtrichtung rechts

€245.00*

#FA108141

Starter MF 12V 2.8KW 4 cylinders Starter MF 12V 2.8KW 4 cylinders

Installation on the left

€239.00*

#FA108140

Starter MF135 installation on the right 12 volts Starter MF135 installation on the right 12 volts

Installation on the right

€239.00*

#FA24495

Starter ring 3 cylinders Starter ring 3 cylinders

Inner diameter (d): 330 mmNumber of teeth: 122 mm

€55.00*

#FA115411

Starterkranz zu Steyr T80 Starterkranz zu Steyr T80

Starterkranz zu Steyr: T80, T84, T86, T180, T180a, T182 nur bei der geschraubten Ausführung

€640.00*

Seite 153 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery