Agricultural machinery

Rotary rake tine suitable for Kuhn Giro rake series

Suitable for Steyr T80, 70 mm, with pre-heating function, 4 connections

90, galvanized, for rotating lights.

Color orange

Warning light with halogen lamp H1 12V/55W fixed mounting with flat base, protection class IP66, operating temperature -30C to 60C, certifications: ECE R10, ECE R65, height 160mm, diameter 140mm, over 10,000 operating hours, connection cable 200mm

Warning light with halogen lamp H1 12V/55W with magnetic fastening, spiral cable and plug, protection class IP66, operating temperature -30C to 60C, certifications: ECE R10, ECE R65, height 169mm, diameter 127mm, over 10,000 operating hours

Warning light with halogen lamp H1 12V/55W with flexible pipe socket mounting, protection class IP66, operating temperature -30C to 60C, certifications: ECE R10, ECE R65, height 240mm, diameter 127mm, over 10,000 operating hours

Compact, high-quality rotating beacon, total height only 220 mm, 110 mm, with flexible rubber base for pipe mounting. Break-proof hood made of polycarbonate with bayonet lock and unscrew protection. Incl. bulb H1.

The round bale fork can be adjusted hydraulically to different bale sizes.Gentle treatment of the silage bales thanks to rotating steel tubes attached to the heavy-duty tine 1200mm. After removing the steel pipes, the heavy-duty tines can be used to pick up bales. Attachment to the front loader via Euro mount or attachment to the three-point possibleLoad load max. 1000kgOpening width 550-1700 mmScope of delivery: support frame including hydraulic cylinder and hoses with coupling, heavy-duty tine 1200mm with attached, rotating steel tubes, weight 140 kg.

black, for expander rope 6 and 8 mm, hole 5 mm, can be mounted on both sides.

70 shore. The length of the round cord is 2 m in the following diameters: 1.78 - 2 - 2.4 - 2.62 - 3 - 3.5 - 4 - 5 - 5.33 - 5.7 - 6 - 7 -8 mm . Incl. cutter knife, roll meter 3 m, glue and cutting gauge.

Practical document holder made of PP plastic with mounting brackets and holes.

E.g. loading wagons, manure spreaders, manure removal systems, conveyor systems. Price per meter.

Working width 135 mm.

Working width 200 mm.

In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Suitable for Steyr

Version: M8 thread

For attaching the side engine cover