Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#53421

Ring black Ring black

Nominal size: DN100

€3.95*

#9507

Ring eye BSP external thread Ring eye BSP external thread

A (mm): 16,76 L (mm): 35,28 Thread: 3/8 Zoll

€4.95*

Variants from €3.00*

#22003

Ring eye with pipe connection thread Ring eye with pipe connection thread

A (mm): 18 L (mm): 28,40 Thread: M 18 x 1,5

with pipe connection, light series DIN 2353, max. operating pressure 230bar

€20.79*

#44078

Ring eye with tube Ring eye with tube

H (mm): 14,5 L (mm): 205 V (mm): 12 Ø C (Divers): 1/4"

€6.59*

Variants from €4.75*

#FA97880

Ring soldering piece R3/8 for 12mm pipe" Ring soldering piece R3/8 for 12mm pipe"

€2.95*

Schwinghebel Untermesser bidux-System, anstelle ESM 267.6020

#FA108991

ESM Rocker arm bottom knife bidux system, instead of ESM 267.6020 Rocker arm bottom knife bidux system, instead of ESM 267.6020

Rocker arm for the bidux system drive, completely pre-assembled with ball joint and rocker bolt.

€509.00*

Schwinghebel ESM 267.0410 zu Kommunalbalken

#FA56932

ESM Rocker arm ESM 267.0410 for municipal beams Rocker arm ESM 267.0410 for municipal beams

Original spare part from ESM. Rocker arm for ESM communal beams suitable for many device manufacturers.

€57.00*

#FA108438

ESM Rocker arm upper knife bidux system, instead of ESM 267.6010 Rocker arm upper knife bidux system, instead of ESM 267.6010

Rocker arm for the bidux system drive, completely pre-assembled with ball joint and rocker bolt.

€509.00*

#FA24919

Rod for handbrake lever Rod for handbrake lever

Suitable for Steyr

€85.00*

#102310

Rod head for hydraulic top link Rod head for hydraulic top link

Cat.: 2 H (mm): 50 d (mm): 28 Ø D (mm): 25,4

Rod head for hydraulic top link. Installation length 63mm, width 50mm

€42.90*

#FA107932

Rod head Steyr M24x1.5 Rod head Steyr M24x1.5

Thread: M24x1.5

€85.00*

#FA7734

Rod shaft Rod shaft

€69.90*

#FA7731

Rod shaft for connecting rod Rod shaft for connecting rod

€119.00*

#52073

Roller chain ASA Simplex Roller chain ASA Simplex

Type: ASA 60-1

DIN 8188, roll of 5 m.

€99.50*

#52011

Roller chain ISO 606 Simplex Roller chain ISO 606 Simplex

A (mm): 19,05 A x C (inch): 3/4 x 7/16 B (mm): 12,07 C (mm): 11,68 D (mm): 22,70 E (mm): 18 Type: 12B-1

DIN 8187, roll of 5 m

€79.90*

Variants from €49.80*

#FA132104

Roof hatch headliner Steyr M968, M975 Roof hatch headliner Steyr M968, M975

Suitable for the roof hatch

€89.00*

Dachscheinwerfergehäuse vorne Steyr 8045-8130

#FA115502

Roof headlight housing front Steyr 8045-8130 Roof headlight housing front Steyr 8045-8130

Roof headlight housing at the front for Steyr 8045 to 8130 SK2Retrofitting for SK1 cabins possible!

€499.00*

#FA68485

Rope end closure with simplex hook Rope end closure with simplex hook

for 8mm rope

€1.30*

#27974

Indemar Rope for single lever and joystick Rope for single lever and joystick

Length (mm): 2500

With fork and thread M6, adjustment thread M16x1.5mm, bending radius 200 mm.

€67.00*

Variants from €34.00*

#FA2437

Rotary harrow tine left, 90x12mm Rotary harrow tine left, 90x12mm

Rotary harrow tine suitable for Maschio type DL, DS, DC. Flange connection 90x12mm with 17mm holes

€11.00*

Kreiseleggenzinke RH66 passend zu Maschio, 90x10mm

#7973

Rotary harrow tine RH66 suitable for Maschio, 90x10mm Rotary harrow tine RH66 suitable for Maschio, 90x10mm

Version: left

Rotary harrow tine suitable for Maschio type HD old version. Flange connection 90x10mm with 17mm holes

€14.90*

#FA2435

Rotary harrow tine right, 90x12mm Rotary harrow tine right, 90x12mm

Rotary harrow tine suitable for Maschio type DL, DS, DC. Flange connection 90x12mm with 17mm holes

€11.00*

#79257

Rotary harrow tine suitable for Amazone Rotary harrow tine suitable for Amazone

Version: right can be used instead of Amazone: 954426

1 hole 18mm thick

€20.90*

#118422

Rotary harrow tine suitable for Amazone KE Rotary harrow tine suitable for Amazone KE

Version: right can be used instead of Amazone: 965779

Quick-change tine with 20mm bore, 18mm thick

€24.50*

Seite 132 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery