Agricultural machinery

Radiator for Steyr WD303 with Perkins engine, M948, M952, M958

Passend zu Serie Steyr M900, 9000M

Height 615 mmWidth 382 mmThickness 70 mm

Total height: 650 mmWidth: 385 mm

Radiator for Steyr 964, 970

WxHxD: 488x528x154 mm

Suitable for Steyr T188, 30, 430can be used instead of Steyr 1188530015, 1188530027, 1188530031WxHxD: 580x468x100mm

Radiator tab at the front for Steyr: 8080 SK2, 8090 SK1/SK2, 8110 SK1/SK2, 8130 SK1/SK2Net size: 435x510mmDepth: 71mm5 rows of net

​For easy retrofitting of a radio control system – NO complicated cable connections! All components are permanently wired and easy to install! 2-channel radio device with wired receiver and transmitter with on/off switch and two functions. The input on the receiver is hard-wired with a 7-pin automotive connector and the outputs with a 3-pin DIN plug each.Frequency: ISM 868 / 915 MHzOutputs max. 5 A,Protection class: IP 67.

​PPlug-ready radio set for 12 and 24 volts!For easy retrofitting of a radio control - NO complicated cable connection!All components are pre-wired and easy to install!2-channel radio set with wired receiver and transmitter with on/off switch and two functions. The 2-pole input on the receiver can be connected to 12 V or 24 V and the outputs each with a 3-pin DIN plug. Frequency: ISM 868 / 915 MHz  Outputs max. 5 A, Protection class: IP 68.

Dimensions cap: 160x47mmTube: 55mmLength: 195mm

Dust and water protected, especially suitable for tractors and construction machinery, flat connectors 6.3 mm, load 12 V, 20 A, max. 380 W, 4-pin

Raised countersunk screw for crank drive system Busatis and system bidux.

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 400 bar, minimum bending radius 45 mm, weight 275 g/m, outer diameter 13.1 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 350 bar, minimum bending radius 55 mm, weight 330 g/m, outer diameter 14.7 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 350 bar, minimum bending radius 55 mm, weight 330 g/m, outer diameter 14.7 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Tractor 2K with union nut M18x1.5 on both sides, tube 12L, 1 straight connection, 1 connection 90 bent, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 330 bar, minimum bending radius 65 mm, weight 395 g/m, connection 12L, M18x1.5 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Tractor 2K with union nut M18x1.5 on both sides, tube 12L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 330 bar, minimum bending radius 65 mm, weight 395 g/m, outer diameter 16.8 mm Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Tractor 2K with union nut M22x1.5 on both sides, tube 15L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 275 bar, minimum bending radius 80 mm, weight 510 g/m, outer diameter 20.3 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Tractor 2K with union nut M22x1.5 on both sides, tube 15L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 275 bar, minimum bending radius 80 mm, weight 510 g/m, outer diameter 20.3 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 400 bar, minimum bending radius 45 mm, weight 275 g/m, outer diameter 13.1 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Base plate made of impact-resistant plastic, snap fastening, 2 holes for fastening with M5 screws, 70 mm hole spacing. LxWxH: 170x75x64mm, suitable for e.g. Case IH, John Deere, ...

suitable for MF, 128x68x48mm, hole spacing: 45mm

Multi-chamber light specifically for the Steyr Plus series. With reflector 207x120 mm, 2 screws M5x20 mm, distance 45 mmfor rear installationon the right, without license plate lighting