Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Agricultural machinery


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA29982
PTO shaft release bearing PTO shaft release bearing

Outer diameter 141.00 mm Inner diameter 105.50 mm Height 21.00 mm

€139.00*
#FA38792
PTO shaft stub for outer bearing, 1 3/8 x 6" PTO shaft stub for outer bearing, 1 3/8 x 6"

Bore 22 mm. Total length 100mm.

€39.90*
#FA9433
PTO stub 1 3/8 x 6" PTO stub 1 3/8 x 6"

For attaching to oil engines. Bore diameter 25 mm, keyway 8 mm.

€24.95*
#FA20214
Pull switch (closer) Pull switch (closer)

12/24 V - 150 W for wall thickness up to 2 mm, 2 screw terminals, switching positions: 0-1.

€3.55*
#FA57365
Pull switch with flat plug Pull switch with flat plug

12V/120W, e.g. for rear fog light, with 3 flat plugs, installation dimension 10mm, switching position 0-1

€14.95*
#379
OMT Pump carrier Pump carrier
E-motor power (kW): 5,5-9 Length (mm): 143 Pump Group: 3 Ø bolt circle (mm): 265 Ø flange (mm): 300

Used to attach the hydraulic pumps to the electric motor. Material: aluminum

€52.90*
Variants from €21.90*
#26862
Pump driver Pump driver
BG: 2 Groove width (mm): 4 mm Interlocking: A 25x22 Length (mm): 23 Number of teeth: 14

Connecting hub between hydraulic pump and gearbox or hydraulic pump and outer bearing.

€9.00*
Variants from €7.99*
#FA113108
Pumpenelement Einspritzpumpe Steyr Pumpenelement Einspritzpumpe Steyr

€155.00*
#FA25338
Push button switch for light Push button switch for light

Installation dimensions (xH) = 30x54 mmSuitable for Fendt, Steyr 80 series, 900 series

€29.95*
#101989
Push-pull coupling sleeve with screw-in thread and O-ring Push-pull coupling sleeve with screw-in thread and O-ring
Thread: G1/2 Zoll BSP AG

With O-ring seal. For screwing directly onto Bosch additional control units SB23. Suitable for all tractor types with Bosch SB23 control units e.g. Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor.Can be coupled under pressure!

€69.90*
Variants from €59.90*
#FA20484
Push-pull coupling sleeve with screw-in thread M22x1.5 and ring socket Push-pull coupling sleeve with screw-in thread M22x1.5 and ring socket

For the additional installation of a ring eye with an inner diameter of 22 mm. The total length of the coupling including the connecting piece for the ring eye and the screw-in thread is 134.80mm.Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!

€72.90*
#FA129516
Push-pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L Push-pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L

​Push-pull plug-in coupling suitable for Fendt SCR, S4 and Gen6 series.Length (without thread) L: 80 mmL1: 30 mmBulkhead thread 15LSize: BG 3Standard designation: ISO 7241-1 A

€99.00*
#FA125550
Push-Pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L Push-Pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L

Push-pull plug-in coupling suitable for Fendt with collar and O-ring groove for attaching the Fendt original oil leak housing.​Length (without thread): 110mmExternal thread: M22x1.5 bulkhead thread 15L Size: BG 3Standard designation: ISO 7241-1 A

€79.90*
#FA20215
Pushbutton (closer) Pushbutton (closer)

12/24 V - 150 W for wall thickness up to 8 mm with rubber cap, 2 screw terminals, switching position: 0-1, thread 22 mm

€11.30*
#FA53758
Indemar Pushbutton, normally open contact Pushbutton, normally open contact

​The pushbutton is a normally open contact. This means that when the pushbutton is pressed, the circuit is closed and current can flow in the working circuit. The pushbutton has an installation thread M12x0.75mm. The maximum switching capacity is 8 A.Suitable for Faie handles no. 34623, 34624, 34625 and 22800

€18.99*
#FA45537
PVC connector PVC connector

12V/24V 3-pin

€13.50*
#FA68660
PVC connector PVC connector

12/24V, 4-pin

€12.65*
#FA10064
PVC connector PVC connector

12V 7-pin

€2.99*
#FA36351
PVC connector PVC connector

12V 13-pin

€6.99*
#16162
PVC handle PVC handle
D (mm): 37 L (mm): 107 Ø D (mm): 25

Gummihandgriff zum Aufstecken

€2.90*
Variants from €2.85*
#FA101666
Faster PVC hose �8x11mm black PVC hose �8x11mm black

Oil-resistant PVC hose with an inner diameter of 8mm for leakage oil collection systems. Price unit is 1 meter.

€1.59*
#72892
PVC manure hose cut to length PVC manure hose cut to length
Length (m): 2 Ø inside (mm): 110 Ø outside (mm): 125

Suitable as a suction and pressure hose. Lightweight, highly flexible PVC hose with a shockproof spiral made of hard PVC and a smooth inner surface. Operating pressure max. 3 bar, vacuum load 0.9 bar.

€92.00*

Content: 2 m (€46.00 / 1 m)

Variants from €78.00*
#FA68659
PVC socket PVC socket

12/24V, 4-pin

€13.85*
#FA10065
PVC socket PVC socket

12V 7-pin

€3.45*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.