Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA12435

Press tine for JOHN DEERE Press tine for JOHN DEERE

€2.79*

#FA31897

Press tine for KRONE Press tine for KRONE

€2.90*

Pressenzinke zu Mc Hale Fusion 1 und 2, F550

#FA75671

Press tine for Mc Hale Fusion 1 and 2, F550 Press tine for Mc Hale Fusion 1 and 2, F550

€2.95*

#FA12440

Press tine for WELGER Press tine for WELGER

€2.95*

#FA102809

Press tine for WELGER Press tine for WELGER

€3.95*

#36831

Press-on handle Press-on handle

D (mm): 8 L (mm): 56

€2.25*

Druckweiterführungsbuchse zu DE85 Ventile, R3/4'

#FA114308

Pressure continuation bushing for DE50 valves, R1/2' Pressure continuation bushing for DE50 valves, R1/2'

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

€17.00*

#FA114309

Pressure continuation bushing for DE85 valves, R3/4' Pressure continuation bushing for DE85 valves, R3/4'

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

€17.00*

Manometer Box mit 2 Manometer und Zubehör

#FA118729

Pressure gauge box with 2 pressure gauges and accessories Pressure gauge box with 2 pressure gauges and accessories

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:1 piece pressure gauge 63mm 0-250bar, graduation 10bar1 piece pressure gauge 63mm 0-600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece pressure gauge direct connection with Minimess screw coupling1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread M10x1 AG with O-ring1 piece thread reduction 1/4?AG / M10x1 IT1 piece thread reduction 3/8?AG / M10x1 IT1 piece thread reduction 1/2?AG / M10x1 IT

€149.00*

Manometer Box mit 6 Manometer und Zubehör

#FA118728

Pressure gauge box with 6 pressure gauges and accessories Pressure gauge box with 6 pressure gauges and accessories

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:2 pieces of pressure gauge 63mm 0 - 60bar, graduation 1bar2 pieces of pressure gauge 63mm 0 - 250bar, graduation 10bar2 pieces of pressure gauge 63mm 0 - 600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece mini measuring hose 2m with measuring connection M16x21 piece pressure gauge connection for mini measuring hose 1 piece pressure gauge connection with Minimess screw coupling1 piece pressure gauge connection with union nut 12L (M18x1.5mm IT)1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread 1 /4?AG1 piece test connection M16x2 / screw-in thread 1/2?AG1 piece thread reduction 3/8?AG / 1/4?IG1 piece thread reduction 1/2?AG / 3/8?IG

€298.00*

Druckstück zu Kette 10x31, 10x35, 10x38, 11x31, 11x35.

#FA73697

Pressure piece for chain 10x31, 10x35, 10x38, 11x31, 11x35. Pressure piece for chain 10x31, 10x35, 10x38, 11x31, 11x35.

€2.99*

#FA104070

TeeJet Pressure reducing and Control valve 23120 Pressure reducing and Control valve 23120

TeeJet pressure reducer &~ Control valve model 23120 made of plastic with spring made of stainless steel 302 and EPDM seal. The regulation takes place via a bypass. Any pressure can be set within the pressure range specified for the respective valve. Once selected, the pressure is secured by the lock nut. Particularly large passage cross-sections minimize flow resistance.Inlet 3/4"~ Male thread, output 3/4"~ Internal thread, pressure gauge connection 1/4"~ Internal thread.Setting range: 0 - 10 bar

€62.90*

#14825

Pressure relief valve 0.5 bar Pressure relief valve 0.5 bar

Ø (inch): 2

TV tested, setting range: 0.3 to 1.5 bar

€57.90*

Variants from €49.90*

Druckbegrenzungventil mit Kegelsitzventil und Manometeranschluss

#120729

OMT Pressure relief valve with cone seat valve Pressure relief valve with cone seat valve

A (mm): 40 B (mm): 55 C (mm): 30 D (mm): 61 Flow rate (l/min): 40 Pressure range (bar): 80 - 300 Standard setting (bar): 150 Thread: 3/8 Zoll

This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat.

€39.00*

#120735

OMT Pressure relief valve with cone seat valve and pressure gauge connection Pressure relief valve with cone seat valve and pressure gauge connection

A (mm): 50 B (mm): 92 C (mm): 50 D (mm): 61 Flow rate (l/min): 90 Pressure range (bar): 50 - 250 Standard setting (bar): 120 Thread: 3/4 Zoll

This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat. This version is equipped with a 1/4" pressure gauge connection.

€59.00*

Variants from €40.90*

#FA45573

Pressure switch for work lights Pressure switch for work lights

Dust and water protected, especially suitable for tractors and construction machinery, flat connectors 6.3 mm, load 12 V, 20 A, max. 380 W, 4-pin

€23.95*

Druckschalter Hubwerk Fendt Senken/Heben

#FA110548

Pressure switch hoist Fendt lowering/raising Pressure switch hoist Fendt lowering/raising

Use: Hoist for lowering and lifting

€34.95*

#FA45581

Pressure switch horn/horn (button) Pressure switch horn/horn (button)

Dust and water protected, especially suitable for tractors and construction machinery, flat connectors 6.3 mm, load 12 V, 20 A, max. 380 W, 2-pin

€29.95*

#FA45578

Pressure switch rotating light/beacon Pressure switch rotating light/beacon

Dust and water protected, especially suitable for tractors and construction machinery, flat connectors 6.3 mm, load 12 V, 20 A, max. 380 W, 6-pin

€37.95*

#FA10007

Pressure transfer (carry over) to blb Pressure transfer (carry over) to blb

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump FAIE control valve with pressure transfer-auxiliary control unit-hoist.for control valves BM/BF40, GM08, R 1/2?

€18.50*

#FA113

Pressure transfer 3/4 Pressure transfer 3/4

€24.90*

#FA101534

Mipa Primer gray, 1l Primer gray, 1l

Primer metal primer with high corrosion protection, gray, 1l

€19.95*

#FA101535

Mipa Primer gray, 5l Primer gray, 5l

Primer with high corrosion protection, 5l

€79.00*

Content: 5 l (€15.80 / 1 l)

#FA59001

Print forwarding to GM08 Print forwarding to GM08

Internal thread R1/2"~

€14.95*

Seite 118 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery