Agricultural machinery

Agricultural machinery spare parts

Tractor parts

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Mähmesser passend zu AGRIA 5300, Messerkopfkulisse 35 mm, ESM-Balken, 4 Gewindelöcher M8, Lochabstand 153 mm

#FA27677

ESM Mower blade suitable for AGRIA 5300, cutter head link 35 mm, ESM bar, 4 threaded holes M8, hole spacing 153 mm Mower blade suitable for AGRIA 5300, cutter head link 35 mm, ESM bar, 4 threaded holes M8, hole spacing 153 mm

20 blades

€212.00*

Mähmesser passend zu AGRIA 5400, 5500 - 2 Gewindelöcher M8, Lochabstand 152,4 mm

#FA2081

Schröckenfux Mower blade suitable for AGRIA 5400, 5500 - 2 threaded holes M8, hole spacing 152.4 mm Mower blade suitable for AGRIA 5400, 5500 - 2 threaded holes M8, hole spacing 152.4 mm

19 blades, 4 cleaning plates

€159.00*

#FA28124

Schröckenfux Mower blade suitable for AGRIA 5400, 5500 - 2 threaded holes M8, hole spacing 152.4 mm Mower blade suitable for AGRIA 5400, 5500 - 2 threaded holes M8, hole spacing 152.4 mm

21 blades, 6 cleaning plates

€176.00*

#FA2080

Schröckenfux Mower blade suitable for AGRIA 5400, 5500 - 2 threaded holes M8, hole spacing 152.4 mm Mower blade suitable for AGRIA 5400, 5500 - 2 threaded holes M8, hole spacing 152.4 mm

17 blades, 4 cleaning plates

€145.00*

Mähmesser passend zu Brielmaier Bidux Portalmäher, Teilung 70 mm, inkl. Messerkopf (Öse) mit Schmiernippel

#FA63706

Schröckenfux Mower blade suitable for Brielmaier Bidux portal mower, pitch 70 mm, including cutter head (eyelet) with grease nipple Mower blade suitable for Brielmaier Bidux portal mower, pitch 70 mm, including cutter head (eyelet) with grease nipple

Upper knife, 34 blades 5802.053.01 of which 7 mushroom blades 5802.054.91

€385.00*

#FA63704

Upper knife, 29 blades 5802.053.01 of which 6 mushroom blades 5802.054.91

€339.00*

#FA63705

Lower knife 29 blades 5802.053.01 of which 5 mushroom blades 5802.054.91

€357.00*

#FA63707

Lower knife 34 blades 5802.053.01 of which 6 mushroom blades 5802.054.91

€415.00*

Mähmesser passend zu Bucher K2, Ovallöcher, Lochabstand 152 mm

#FA2321

Schröckenfux Mower blade suitable for Bucher K2, oval holes, hole spacing 152 mm Mower blade suitable for Bucher K2, oval holes, hole spacing 152 mm

19 blades: 14 blades 130.20.001, 5 blades 130.20.002, 6 cleaning plates FS 964, 1 guide bar 105.20.135

€99.00*

Mähmesser passend zu Bucher K2, K3 mit Ovallöcher, LA=152mm

#FA7867

Schröckenfux Mower blade suitable for Bucher K2,K3 with oval holes, LA=152mm Mower blade suitable for Bucher K2,K3 with oval holes, LA=152mm

21 blades: 16 blades 130.20.001, 5 blades 130.20.002, 6 cleaning plates FS 964, 1 guide bar 105.20.135

€109.00*

Mähmesser passend zu Bucher Record mit Ovallöcher, LA=152mm

#FA6739

Schröckenfux Mower blade suitable for Bucher Record with oval holes, LA=152mm Mower blade suitable for Bucher Record with oval holes, LA=152mm

19 blades 150.05.402, 4 cleaning plates FS 964, 1 guide bar 105.20.135

€99.00*

#FA6740

Schröckenfux Mower blade suitable for Bucher Record with oval holes, LA=152mm Mower blade suitable for Bucher Record with oval holes, LA=152mm

21 blades 150.05.400, 4 cleaning plates FS 964, 1 guide bar 150.05.400

€112.00*

Mähmesser passend für Busatis mit einfachen Führungsklingen

#FA7882

Schröckenfux Mower blade suitable for Busatis with simple guide blades Mower blade suitable for Busatis with simple guide blades

24 blades, 18 of which are DIN 80, 6 guide blades GB 543

€199.00*

Mähmesser passend zu Mörtl Hoch-Florett (vollhydraulischer Antrieb) mit Messerkopf NY535/1

#FA75230

Schröckenfux Mower blade suitable for M�rtl High-Florett (fully hydraulic drive) with cutter head NY535/1 Mower blade suitable for M�rtl High-Florett (fully hydraulic drive) with cutter head NY535/1

18 blades N336 + 4 guide blades F336R = 22 Kl.

€298.00*

-19 %

#FA58589

19 blades N336 + 5 guide blades F336R = 24 Kl.

€259.00* €319.00* (18.81% saved)

Mähmesser passend zu Mörtl UNI-Y (vollhydr. Antrieb) mit Messerkopf NY35

#FA7806

Schröckenfux Mower blade suitable for M�rtl UNI-Y&quot (fully hydraulic drive) with cutter head NY35 Mower blade suitable for M�rtl UNI-Y&quot (fully hydraulic drive) with cutter head NY35

23 blades N36/5 +5 guide blades N36/5R

€359.00*

Mähmesser passend zu STEYR T86, N180A, 182, 182A, ohne Reinigungsplatten

#FA7899

Schröckenfux Mower blade suitable for STEYR T86, N180A, 182, 182A, without cleaning plates Mower blade suitable for STEYR T86, N180A, 182, 182A, without cleaning plates

18 blades DIN 80, 1 knife head 180a 720056.

€165.00*

Mähmesser passend zu Vogel & Noot Motormäher RN leicht II, III, Alpin, Alpinist mit Nasenschraube, Lochabstand 106mm

#FA41362

Schröckenfux Mower blade suitable for Vogel and Noot motor mower RN light II, III, Alpin, Alpinist with nose screw, hole spacing 106mm Mower blade suitable for Vogel and Noot motor mower RN light II, III, Alpin, Alpinist with nose screw, hole spacing 106mm

18 blades, 10 pieces DIN80. 8 guide blades GB543.

€119.00*

Mähmesser mit Gewindelöcher M8, Lochabstand 106 mm

#FA7866

Schröckenfux Mower blade with M8 threaded holes, hole spacing 106 mm Mower blade with M8 threaded holes, hole spacing 106 mm

18 blades, 10 pieces DIN80. 8 guide blades GB543.

€119.00*

Mähmesser zu Reform/BCS Serie 600 und 700

#FA16043

Schröckenfux Mower blades for Reform/BCS series 600 and 700 Mower blades for Reform/BCS series 600 and 700

17 blades, B590.43553.2

€41.90*

#FA16041

Schröckenfux Mower blades for Reform/BCS series 600 and 700 Mower blades for Reform/BCS series 600 and 700

15 blades, B590.43544.0

€39.00*

#FA7590

Schröckenfux Mower fingers Mower fingers

suitable for Steyr-Phantom

€27.00*

Mähmesser 120cm, 16 Klingen DIN 80, anstelle von Agria 63-02-71

#FA7852

Schröckenfux Mowing blade 120cm, 16 blades DIN 80, instead of Agria 63-02-71 Mowing blade 120cm, 16 blades DIN 80, instead of Agria 63-02-71

Total number of blades 16 pieces, 11 blades DIN 80, 5 blades 60-02-09, 4 cleaning plates 50-03-10

€119.00*

Mähmesser 130 cm 17 Klingen, 2 Gewindelöcher M8, Lochabstand 152 mm zu Pfeilschnittbalken T61 neue Ausführung

#FA49043

Schröckenfux Mowing blade 130 cm, 17 blades, 2 threaded holes M8, hole spacing 152 mm to arrow cut bar T61, new design Mowing blade 130 cm, 17 blades, 2 threaded holes M8, hole spacing 152 mm to arrow cut bar T61, new design

17 DIN80 serrated blades, 4 cleaning plates, 1 reinforcement strip, H150.550.070

€89.00*

Seite 104 von 183

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery